BA178M18FP-E2 Equivalent & Substitute Parts

Part Overview

The BA178M18FP-E2 is a linear voltage regulator IC manufactured by Rohm Semiconductor, designed for positive fixed output regulation at 18V with 500mA output current capacity. This Surface Mount device in TO-252-3 (DPAK) packaging is classified as an Active product with full RoHS3 compliance and unlimited moisture sensitivity rating. Linear voltage regulators of this specification are essential in power management applications requiring stable 18V rails with moderate current delivery and low dropout characteristics.

Substiute Parts

BA178M18FP-E2

Rohm SemiconductorIn Stock: 2293BA178M18FP-E2 Datasheet

Current PartRFQ

MC78M18CDTRKG

onsemiIn Stock: 1548MC78M18CDTRKG Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the BA178M18FP-E2 is determined by the following critical parameters:

• Fixed output voltage of 18V
• Output current capacity of 500mA minimum
• Surface Mount DPAK (TO-252-3) package compatibility
• Input voltage tolerance (maximum 33V or higher)
• Active product status with current manufacturing support
• RoHS3 compliance for regulatory alignment

The MC78M18CDTRKG from onsemi meets all substitution criteria. Both devices share identical output voltage, output current rating, and package form factor. The substitute part demonstrates equivalent electrical performance within the specified parameter ranges and maintains the same regulatory compliance profile.

Parameter Comparison

Engineering Selection Recommendations

Both the BA178M18FP-E2 and MC78M18CDTRKG are Active products with full RoHS3 compliance and REACH unaffected status, ensuring regulatory alignment for current manufacturing environments. The MC78M18CDTRKG offers extended input voltage tolerance (35V vs. 33V maximum) and integrated over-temperature and short-circuit protection features, providing enhanced robustness in applications subject to transient overvoltage or thermal stress conditions. The onsemi substitute also demonstrates superior power supply rejection ratio performance (70dB vs. 58dB at 120Hz), beneficial for noise-sensitive analog circuits. Selection between these parts should be based on specific application requirements regarding input voltage headroom, thermal management capability, and noise performance specifications.

Frequently Asked Questions (FAQ)

Q: Can MC78M18CDTRKG directly replace BA178M18FP-E2 in existing designs?

A: Yes, both devices share identical output voltage (18V), output current rating (500mA), and TO-252-3 DPAK package form factor. Pin-to-pin compatibility is confirmed. The onsemi part offers additional protection features and higher input voltage rating, making it functionally compatible without circuit modification.

Q: What are the key differences between these two regulators?

A: The primary differences are input voltage maximum rating (35V vs. 33V), integrated protection features (onsemi includes over-temperature and short-circuit protection), operating temperature range (0°C to 125°C vs. -40°C to 85°C), and PSRR performance (70dB vs. 58dB). Both maintain identical output specifications and package compatibility.

Q: Are both parts suitable for high-temperature applications?

A: The BA178M18FP-E2 operates to 85°C maximum, while the MC78M18CDTRKG extends to 125°C. Application thermal requirements determine which part is appropriate. For ambient temperatures exceeding 85°C, the onsemi substitute is the required selection.

Q: Do packaging differences affect board layout or thermal management?

A: Both parts use identical TO-252-3 DPAK packaging with the same footprint and thermal characteristics. No layout modifications are required for substitution. Thermal management considerations remain equivalent between the two devices.

Q: Which part offers better noise performance?

A: The MC78M18CDTRKG demonstrates superior power supply rejection ratio at 70dB (120Hz) compared to the BA178M18FP-E2 at 58dB (120Hz). This 12dB advantage reduces output noise ripple, benefiting noise-sensitive analog signal processing circuits.