BA08CC0WFP-E2 Equivalent & Substitute Parts

Part Overview

The BA08CC0WFP-E2 is a linear voltage regulator IC manufactured by Rohm Semiconductor, designed for positive fixed 8V output applications with 1A current capacity. This Surface Mount device in TO-252-5 packaging is classified as Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical performance, identical output voltage, compatible packaging, and matching operating temperature ranges are maintained across alternative manufacturers.

Substiute Parts

BA08CC0WFP-E2

Rohm SemiconductorIn Stock: 67913BA08CC0WFP-E2 Datasheet

Current PartRFQ

TL751M08QKVURQ1

Texas InstrumentsIn Stock: 951TL751M08QKVURQ1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the BA08CC0WFP-E2 are qualified based on the following criteria:

• Fixed output voltage of 8V
• Output current capability of 750mA or greater
• Maximum input voltage of 25V or higher
• TO-252-5 package compatibility
• Surface Mount technology
• Operating temperature range of -40°C to 125°C
• Active product status
• RoHS3 compliance
• Identical protection feature set (Over Current, Over Temperature, Over Voltage)

The TL751M08QKVURQ1 meets these substitution criteria with equivalent electrical characteristics and package specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the BA08CC0WFP-E2 and TL751M08QKVURQ1 are Active product status components with ROHS3 compliance. The TL751M08QKVURQ1 carries AEC-Q100 automotive qualification and includes reverse polarity protection, providing additional robustness for automotive and industrial applications. Selection between these parts depends on application current requirements: the BA08CC0WFP-E2 supports full 1A output, while the TL751M08QKVURQ1 is rated for 750mA maximum output. Both devices maintain identical 8V fixed output voltage, matching operating temperature range, and equivalent PSRR performance.

Frequently Asked Questions (FAQ)

Q: Can the TL751M08QKVURQ1 directly replace the BA08CC0WFP-E2 in all applications?

A: Direct substitution is valid when application current demand does not exceed 750mA. The TL751M08QKVURQ1 output current rating of 750mA is lower than the BA08CC0WFP-E2 1A rating. Applications requiring sustained output current above 750mA require the BA08CC0WFP-E2.

Q: Are the package dimensions identical between these parts?

A: Both parts use TO-252-5 (DPAK with 4 leads plus tab) packaging. PCB layout and thermal management considerations remain equivalent.

Q: What is the significance of the AEC-Q100 qualification on the TL751M08QKVURQ1?

A: AEC-Q100 qualification indicates the TL751M08QKVURQ1 meets automotive industry reliability and quality standards. This qualification is relevant for automotive and high-reliability applications but does not affect functional substitution in non-automotive designs.

Q: Does the reverse polarity protection on the TL751M08QKVURQ1 affect substitution compatibility?

A: Reverse polarity protection is an additional safety feature that does not impact functional compatibility. Its presence on the TL751M08QKVURQ1 provides enhanced circuit protection compared to the BA08CC0WFP-E2.

Q: Are the thermal and electrical performance characteristics equivalent?

A: Both devices operate across -40°C to 125°C temperature range with identical 55dB PSRR at 120Hz. The TL751M08QKVURQ1 specifies 0.6V dropout voltage at 750mA, while the BA08CC0WFP-E2 dropout specification is not provided. Thermal performance depends on PCB layout and heat dissipation design in both cases.