BA07SFP-E2 Equivalent & Substitute Parts

Part Overview

The BA07SFP-E2 is a linear voltage regulator IC manufactured by Rohm Semiconductor, designed for positive fixed output regulation at 7V with 1A output current capacity. This Surface Mount device in TO-252-5 packaging is actively produced and widely used in power management applications requiring compact, reliable voltage regulation. Substitute parts are identified to provide design flexibility, inventory alternatives, and extended availability options while maintaining functional compatibility within specified electrical and mechanical parameters.

Substiute Parts

BA07SFP-E2

Rohm SemiconductorIn Stock: 805BA07SFP-E2 Datasheet

Current PartRFQ

BA70BC0WFP-E2

Rohm SemiconductorIn Stock: 4577BA70BC0WFP-E2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the BA07SFP-E2 is determined by strict alignment of the following critical parameters:

• Output voltage (fixed at 7V)
• Output current capacity (1A minimum)
• Package type (TO-252-5 / DPAK with 4 Leads + Tab)
• Mounting type (Surface Mount)
• Output configuration (Positive)
• Output type (Fixed)
• Regulatory compliance (ROHS3, REACH Unaffected)

The BA70BC0WFP-E2 qualifies as a substitute based on matching all critical electrical and mechanical parameters. Variations in maximum input voltage (16V vs. 25V), quiescent current, and operating temperature range do not disqualify substitution when the application input voltage remains within the lower specification limit.

Parameter Comparison

Engineering Selection Recommendations

Both the BA07SFP-E2 and BA70BC0WFP-E2 are active products from Rohm Semiconductor with ROHS3 compliance and REACH Unaffected status, meeting current regulatory requirements for electronic component manufacturing and use.

Selection between these parts depends on application-specific input voltage requirements. The BA07SFP-E2 supports input voltages up to 25V, while the BA70BC0WFP-E2 is rated to 16V maximum input. Applications with input voltages exceeding 16V require the BA07SFP-E2. For applications with input voltages within the 16V limit, the BA70BC0WFP-E2 offers lower quiescent current (0.5 mA vs. 2.5 mA) and extended operating temperature range (-40°C to 105°C vs. -40°C to 85°C).

Both devices provide identical output voltage (7V fixed), output current (1A), PSRR performance (55dB at 120Hz), and physical packaging (TO-252-5), ensuring direct functional compatibility within their respective input voltage specifications.

Frequently Asked Questions (FAQ)

Q: Can BA70BC0WFP-E2 replace BA07SFP-E2 in all applications?

A: Substitution is valid only when the application input voltage does not exceed 16V. The BA07SFP-E2 supports input voltages up to 25V, while BA70BC0WFP-E2 is limited to 16V maximum. Verify your circuit input voltage specification before substitution.

Q: What are the key differences between these parts?

A: The primary differences are maximum input voltage (25V vs. 16V), quiescent current (2.5 mA vs. 0.5 mA), and operating temperature range (-40°C to 85°C vs. -40°C to 105°C). Output voltage, output current, package type, and regulatory compliance are identical.

Q: Are both parts available in the same packaging?

A: Yes. Both BA07SFP-E2 and BA70BC0WFP-E2 use TO-252-5 (DPAK with 4 Leads + Tab) Surface Mount packaging with identical pinout and footprint compatibility.

Q: Which part should I select for low-power applications?

A: The BA70BC0WFP-E2 is preferable for low-power designs due to its lower quiescent current (0.5 mA vs. 2.5 mA), provided the input voltage remains within 16V specification.

Q: Are both parts RoHS compliant?

A: Yes. Both BA07SFP-E2 and BA70BC0WFP-E2 are ROHS3 Compliant with Moisture Sensitivity Level 1 (Unlimited) and REACH Unaffected status.