BA06CC0FP-E2 Equivalent & Substitute Parts

Part Overview

The BA06CC0FP-E2 is a linear voltage regulator IC manufactured by Rohm Semiconductor, designed to provide a fixed 6V positive output at 1A maximum current. This device is classified as a Power Management PMIC and is currently in active production status. The regulator integrates over-current, over-temperature, and over-voltage protection features, making it suitable for applications requiring stable 6V power delivery in space-constrained surface-mount designs.

Finding equivalent and substitute parts becomes necessary when the primary part reaches end-of-life status, inventory constraints occur, or design requirements necessitate alternative sourcing options while maintaining functional compatibility.

Substiute Parts

BA06CC0FP-E2

Rohm SemiconductorIn Stock: 3752BA06CC0FP-E2 Datasheet

Current PartRFQ

UA78M06CKVURG3

Texas InstrumentsIn Stock: 3291UA78M06CKVURG3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the BA06CC0FP-E2 are identified based on the following critical parameters that determine functional compatibility:

• Output Voltage: Fixed 6V output is the primary functional requirement
• Package Type: TO-252-3 (DPAK) surface-mount package ensures mechanical and thermal compatibility
• Output Current Capability: Minimum 500mA required for most applications; 1A is preferred
• Input Voltage Range: Maximum 25V input voltage tolerance
• Protection Features: Over-current and over-temperature protection are standard across qualified substitutes
• Regulatory Compliance: ROHS3 compliance and EAR99 classification maintained across all alternatives

The UA78M06CKVURG3 from Texas Instruments qualifies as a direct substitute based on matching output voltage, package type, input voltage rating, and regulatory compliance. Differences in output current capability (500mA vs. 1A) and operating temperature range represent the primary technical distinctions requiring application-level evaluation.

Parameter Comparison

Engineering Selection Recommendations

The BA06CC0FP-E2 remains the primary selection for new designs due to its active production status and 1A output current capability. The device is ROHS3 compliant and maintains full regulatory compliance for industrial and commercial applications.

The UA78M06CKVURG3 serves as a qualified substitute when the BA06CC0FP-E2 becomes unavailable. This part maintains identical output voltage, package type, and input voltage specifications. However, the reduced output current rating (500mA vs. 1A) restricts its use to applications drawing less than 500mA from the 6V rail. The Last Time Buy status of the UA78M06CKVURG3 indicates limited future availability; long-term designs should prioritize the BA06CC0FP-E2 or identify additional qualified alternatives.

Both parts maintain ROHS3 compliance and EAR99 classification, ensuring regulatory compatibility across equivalent sourcing scenarios.

Frequently Asked Questions (FAQ)

Q: Can the UA78M06CKVURG3 directly replace the BA06CC0FP-E2 in all applications?

A: Direct replacement is possible only in applications where output current does not exceed 500mA. The BA06CC0FP-E2 supports 1A output, while the UA78M06CKVURG3 is rated for 500mA maximum. Circuit redesign or component relocation may be necessary for higher-current applications.

Q: Are the package dimensions identical between these parts?

A: Both parts use the TO-252-3 DPAK package with identical pinout and thermal characteristics. PCB layout and thermal management considerations remain unchanged during substitution.

Q: What is the significance of the operating temperature range difference?

A: The BA06CC0FP-E2 operates from -40°C to 125°C, while the UA78M06CKVURG3 operates from 0°C to 125°C. Applications requiring operation below 0°C must use the BA06CC0FP-E2. Standard commercial and industrial applications typically operate within the 0°C to 125°C range, making the UA78M06CKVURG3 suitable for these use cases.

Q: How do the PSRR specifications affect circuit performance?

A: The UA78M06CKVURG3 provides superior power supply rejection ratio (80dB vs. 55dB at 120Hz), resulting in better noise rejection from the input supply. This advantage may benefit noise-sensitive analog circuits but does not affect basic voltage regulation functionality.

Q: Are both parts suitable for new design implementations?

A: The BA06CC0FP-E2 is recommended for new designs due to active production status. The UA78M06CKVURG3 carries Last Time Buy status, indicating limited future availability and making it unsuitable as a primary choice for long-term production designs.