B41896C4228M002 Equivalent & Substitute Parts

Part Overview

The B41896C4228M002 is a 2200 µF, 16 V aluminum electrolytic capacitor in radial, can package manufactured by EPCOS - TDK Electronics. This component is designed for automotive applications with AEC-Q200 qualification and operates across -55°C to 125°C. The part is currently obsolete, making identification of functionally equivalent alternatives necessary for ongoing system support and component procurement.

Key Parameters

Parameter	Value
Capacitance	2200 µF
Voltage Rating	16 V
Tolerance	±20%
Package Type	Radial, Can
Lead Spacing	0.197" (5.00 mm)
Diameter	0.492" (12.50 mm)
Height	1.260" (32.00 mm)
Mounting Type	Through Hole
Polarization	Polar
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution of the B41896C4228M002 is determined by the following critical parameters:

Capacitance Value: 2200 µF (exact match required)
Voltage Rating: 16 V (exact match required)
Tolerance: ±20% (exact match required)
Package Configuration: Radial, Can with 0.197" (5.00 mm) lead spacing and 0.492" (12.50 mm) diameter (exact match required for PCB compatibility)
Mounting Type: Through Hole (exact match required)
Polarization: Polar (exact match required)
RoHS Compliance: ROHS3 Compliant (required for regulatory alignment)

The substitute part 16ZLG2200MEFC12.5X25 from Rubycon meets all critical electrical and mechanical parameters. Variations in lifetime ratings, operating temperature ranges, ESR values, and ripple current specifications do not preclude substitution when the above parameters align.

Parameter Comparison

Parameter	B41896C4228M002 (EPCOS)	16ZLG2200MEFC12.5X25 (Rubycon)
Capacitance	2200 µF	2200 µF
Voltage Rating	16 V	16 V
Tolerance	±20%	±20%
Lead Spacing	0.197" (5.00 mm)	0.197" (5.00 mm)
Diameter	0.492" (12.50 mm)	0.492" (12.50 mm)
Height	1.260" (32.00 mm)	1.063" (27.00 mm)
Mounting Type	Through Hole	Through Hole
Package / Case	Radial, Can	Radial, Can
Polarization	Polar	Polar
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
ESR @ 120 Hz	109 mOhm	Not specified
Impedance	26 mOhms	12 mOhms
Ripple Current @ 100 kHz	2.86 A	2.9 A
Lifetime @ Temperature	7000 Hrs @ 125°C	5000 Hrs @ 105°C
Operating Temperature Range	-55°C ~ 125°C	-40°C ~ 105°C
Product Status	Obsolete	Active

Engineering Selection Recommendations

The 16ZLG2200MEFC12.5X25 from Rubycon is a direct functional substitute for the obsolete B41896C4228M002. Both components share identical electrical specifications (2200 µF, 16 V, ±20% tolerance) and mechanical compatibility (radial can package, 5.00 mm lead spacing, 12.50 mm diameter, through-hole mounting).

The Rubycon substitute is currently in active production status with 806 units in stock, providing supply continuity for applications requiring this capacitor value. Both parts maintain ROHS3 compliance and are suitable for general-purpose and automotive-grade applications.

The height difference (1.063" versus 1.260") must be verified against PCB layout constraints. The lower impedance of the substitute (12 mOhms versus 26 mOhms) and comparable ripple current rating (2.9 A versus 2.86 A @ 100 kHz) indicate improved high-frequency performance characteristics.

Frequently Asked Questions (FAQ)

Q: Can the 16ZLG2200MEFC12.5X25 be used as a direct replacement on existing PCBs designed for the B41896C4228M002?

A: Yes, with one consideration. The substitute is 0.197" (5.00 mm) shorter in height (1.063" versus 1.260"). Verify that the PCB layout and any mechanical constraints (enclosure clearance, component stacking) accommodate this reduced height. Lead spacing and diameter are identical, ensuring electrical connection compatibility.

Q: Are there differences in reliability or lifetime between these two parts?

A: The B41896C4228M002 specifies 7000 hours at 125°C, while the 16ZLG2200MEFC12.5X25 specifies 5000 hours at 105°C. These ratings reflect different thermal stress conditions. The substitute operates at a lower maximum temperature (-40°C to 105°C versus -55°C to 125°C). Application-specific thermal profiles determine which rating is relevant for your use case.

Q: Why is the impedance lower on the substitute part?

A: The 16ZLG2200MEFC12.5X25 has 12 mOhms impedance compared to 26 mOhms on the original. Lower impedance generally indicates improved performance at high frequencies and lower voltage ripple. This is a favorable characteristic for most applications.

Q: Are both parts RoHS compliant?

A: Yes. Both the B41896C4228M002 and 16ZLG2200MEFC12.5X25 are ROHS3 compliant, meeting current environmental and regulatory requirements.

Q: What is the inventory status for the substitute?

A: The 16ZLG2200MEFC12.5X25 has 806 units in stock as new original components, providing immediate availability for procurement.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message