B41895B5338M Equivalent & Substitute Parts

Part Overview

The B41895B5338M is a 3300 µF, 25 V aluminum electrolytic capacitor in radial, can package manufactured by EPCOS - TDK Electronics. This component is classified as Active and is designed for automotive applications with AEC-Q200 qualification. The part operates across a temperature range of -40°C to 125°C with a rated lifetime of 3000 hours at 125°C. Finding equivalent or substitute parts may be necessary due to inventory constraints, lead time requirements, or design optimization needs while maintaining electrical and mechanical compatibility.

Substiute Parts

B41895B5338M

EPCOS - TDK ElectronicsIn Stock: 772B41895B5338M Datasheet

Current PartRFQ

EEU-TP1E332

Panasonic Electronic ComponentsIn Stock: 1197EEU-TP1E332 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the B41895B5338M is determined by the following critical parameters:

• Capacitance Value: Must be 3300 µF
• Voltage Rating: Must be 25 V or higher
• Tolerance: Must be ±20% or tighter
• Package Configuration: Must be Radial, Can with identical lead spacing (0.295" / 7.50 mm) and physical dimensions (0.630" diameter, 1.319" height maximum)
• Mounting Type: Must be Through Hole
• Polarization: Must be Polar
• Automotive Compliance: Must carry AEC-Q200 qualification
• RoHS Compliance: Must be ROHS3 Compliant

The EEU-TP1E332 manufactured by Panasonic Electronic Components meets all substitution criteria and is classified as an equivalent part for the B41895B5338M.

Parameter Comparison

Engineering Selection Recommendations

Both the B41895B5338M and EEU-TP1E332 are Active products with full AEC-Q200 automotive qualification and ROHS3 compliance. The parts are electrically and mechanically interchangeable based on the provided specifications. The EEU-TP1E332 offers an extended lifetime rating of 5000 hours at 125°C compared to 3000 hours for the B41895B5338M, and supports an upper operating temperature of 135°C versus 125°C. Selection between these parts should be based on availability, lead time, and application-specific lifetime requirements.

Frequently Asked Questions (FAQ)

Q: Can the EEU-TP1E332 be used as a direct replacement for the B41895B5338M?

A: Yes. Both parts share identical capacitance (3300 µF), voltage rating (25 V), tolerance (±20%), package configuration (Radial, Can), lead spacing (0.295" / 7.50 mm), physical dimensions, and mounting type (Through Hole). Both carry AEC-Q200 qualification and ROHS3 compliance, meeting all substitution criteria.

Q: Are there any differences in electrical performance between these parts?

A: The primary electrical difference is the lifetime rating. The EEU-TP1E332 is rated for 5000 hours at 125°C, while the B41895B5338M is rated for 3000 hours at 125°C. The EEU-TP1E332 also supports operation up to 135°C compared to 125°C for the B41895B5338M.

Q: Will the EEU-TP1E332 fit in the same PCB footprint as the B41895B5338M?

A: Yes. Both parts have identical lead spacing (0.295" / 7.50 mm), diameter (0.630" / 16.00 mm), and maximum height (1.319" / 34.60 mm). They are mechanically interchangeable in Through Hole applications.

Q: Are both parts suitable for automotive applications?

A: Yes. Both the B41895B5338M and EEU-TP1E332 carry AEC-Q200 qualification and are approved for automotive use.

Q: What is the RoHS compliance status of these parts?

A: Both parts are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory requirements.