B360BE-13 Equivalent & Substitute Parts

Part Overview

The B360BE-13 is a Schottky rectifier diode rated for 60 V DC reverse voltage and 3 A average rectified current in a Surface Mount SMB (DO-214AA) package. This part is classified as Obsolete, necessitating identification of equivalent and substitute components for ongoing design support and procurement continuity. The B360BE-13 is ROHS3 compliant and suitable for fast recovery applications requiring switching speeds of 500 ns or less at currents exceeding 200 mA.

Key Parameters

Parameter	Value
Voltage - DC Reverse (Vr) (Max)	60 V
Current - Average Rectified (Io)	3 A
Voltage - Forward (Vf) (Max) @ If	650 mV @ 3 A
Speed	Fast Recovery ≤ 500 ns, > 200 mA (Io)
Current - Reverse Leakage @ Vr	200 µA @ 60 V
Capacitance @ Vr, F	110 pF @ 4 V, 1 MHz
Package / Case	DO-214AA, SMB
Operating Temperature - Junction	-55°C ~ 150°C
Technology	Schottky
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution of the B360BE-13 is determined by the following critical parameters:

Voltage Rating: All substitute parts must maintain a DC reverse voltage rating of 60 V or greater to ensure safe operation within the original circuit design envelope.

Current Rating: The average rectified current capacity must be equal to or greater than 3 A. Parts with lower current ratings do not qualify as direct substitutes.

Package Type: All substitutes must use the DO-214AA (SMB) Surface Mount package to ensure mechanical and thermal compatibility with existing PCB layouts.

Technology: Schottky diode technology is required to maintain the fast recovery characteristics and forward voltage performance of the original design.

Operating Temperature Range: The junction temperature range must encompass -55°C to 150°C to ensure thermal compatibility.

Speed Characteristics: Fast recovery performance with switching speeds of 500 ns or less at currents exceeding 200 mA is required.

The B360BE-13 has two identified substitutes: B360B-13-F (Diodes Incorporated, Active status) and SK16B (Taiwan Semiconductor Corporation, Active status). The B360B-13-F is a direct functional equivalent with identical electrical ratings. The SK16B is a partial substitute with reduced current rating (1 A versus 3 A) and therefore does not qualify as a full equivalent.

Parameter Comparison

Parameter	B360BE-13	B360B-13-F	SK16B
Manufacturer	Diodes Incorporated	Diodes Incorporated	Taiwan Semiconductor Corporation
Product Status	Obsolete	Active	Active
Voltage - DC Reverse (Vr) (Max)	60 V	60 V	60 V
Current - Average Rectified (Io)	3 A	3 A	1 A
Voltage - Forward (Vf) (Max) @ If	650 mV @ 3 A	700 mV @ 3 A	750 mV @ 1 A
Speed	Fast Recovery ≤ 500 ns, > 200 mA (Io)	Fast Recovery ≤ 500 ns, > 200 mA (Io)	Fast Recovery ≤ 500 ns, > 200 mA (Io)
Current - Reverse Leakage @ Vr	200 µA @ 60 V	500 µA @ 60 V	500 µA @ 60 V
Capacitance @ Vr, F	110 pF @ 4 V, 1 MHz	200 pF @ 4 V, 1 MHz	Not specified
Package / Case	DO-214AA, SMB	DO-214AA, SMB	DO-214AA, SMB
Operating Temperature - Junction	-55°C ~ 150°C	-55°C ~ 150°C	-55°C ~ 150°C
Technology	Schottky	Schottky	Schottky
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Qualification	Not specified	AEC-Q101	Not specified

Engineering Selection Recommendations

B360B-13-F (Diodes Incorporated): This part is the primary substitute for the B360BE-13. It maintains identical voltage and current ratings (60 V, 3 A), identical package type (DO-214AA, SMB), and identical operating temperature range (-55°C to 150°C). The B360B-13-F is in Active product status, ensuring long-term availability and supply chain continuity. It carries AEC-Q101 automotive qualification and ROHS3 compliance. The forward voltage specification is 700 mV @ 3 A compared to 650 mV @ 3 A for the original part, representing a 50 mV increase. Reverse leakage current is specified at 500 µA @ 60 V versus 200 µA @ 60 V for the B360BE-13. Capacitance is 200 pF @ 4 V, 1 MHz versus 110 pF @ 4 V, 1 MHz. These parameter differences are within typical manufacturing tolerances for Schottky diodes and do not preclude functional equivalence in standard rectification applications.

SK16B (Taiwan Semiconductor Corporation): This part shares the 60 V voltage rating, DO-214AA package, and operating temperature range with the B360BE-13. However, the SK16B is rated for 1 A average rectified current, which is significantly lower than the 3 A requirement of the original part. The SK16B does not qualify as a direct substitute for applications requiring 3 A current capacity. This part is suitable only for circuits where the current requirement has been reduced or where the original 3 A specification was not a critical design constraint.

Frequently Asked Questions (FAQ)

Q: Can the B360B-13-F be used as a direct replacement for the B360BE-13?

A: Yes. The B360B-13-F is electrically and mechanically equivalent to the B360BE-13. Both parts share identical voltage ratings (60 V), current ratings (3 A), package type (DO-214AA, SMB), and operating temperature range (-55°C to 150°C). The B360B-13-F is in Active product status, providing superior supply chain availability compared to the Obsolete B360BE-13.

Q: What are the differences between the B360BE-13 and B360B-13-F?

A: The primary differences are product status (Obsolete versus Active) and minor electrical parameter variations. The B360B-13-F specifies forward voltage at 700 mV @ 3 A versus 650 mV @ 3 A for the B360BE-13, a 50 mV difference. Reverse leakage current is 500 µA @ 60 V for the B360B-13-F versus 200 µA @ 60 V for the B360BE-13. Capacitance is 200 pF @ 4 V, 1 MHz for the B360B-13-F versus 110 pF @ 4 V, 1 MHz for the B360BE-13. These variations are within normal Schottky diode manufacturing tolerances.

Q: Can the SK16B replace the B360BE-13?

A: The SK16B is not a suitable direct replacement for the B360BE-13 in applications requiring 3 A current capacity. The SK16B is rated for only 1 A average rectified current, making it unsuitable for circuits designed around the 3 A specification of the original part. The SK16B may be used only in modified designs where the current requirement has been reduced.

Q: Are all substitute parts available in the same package?

A: Yes. Both the B360B-13-F and SK16B use the DO-214AA (SMB) Surface Mount package, identical to the B360BE-13. This ensures mechanical compatibility with existing PCB layouts without requiring board redesign.

Q: What compliance certifications apply to the substitute parts?

A: The B360B-13-F carries AEC-Q101 automotive qualification and is ROHS3 compliant. The SK16B is ROHS3 compliant. Both parts are RoHS3 compliant and suitable for applications requiring environmental compliance.

Q: What is the operating temperature range for substitute parts?

A: Both the B360B-13-F and SK16B operate across a junction temperature range of -55°C to 150°C, identical to the B360BE-13. This ensures thermal compatibility in applications with the same environmental requirements.

Q: Are there differences in packaging options between the main part and substitutes?

A: The B360BE-13 is supplied in standard packaging. The B360B-13-F is available in Cut Tape (CT) and Digi-Reel® packaging options. The SK16B is supplied in Tape & Reel (TR) format. All three parts use the same DO-214AA (SMB) component package.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message