AZH2011 Equivalent & Substitute Parts

Part Overview

The AZH2011 is a snap action SPDT switch manufactured by Panasonic Industrial Automation Sales, designed for chassis mount applications requiring 5A at 125V AC operation. This switch features a round pin plunger actuator with IP67 ingress protection and is currently in active production status. Substitute parts are identified when equivalent electrical ratings, mechanical specifications, and mounting configurations are available from alternative manufacturers, enabling design flexibility and supply chain continuity.

Substiute Parts

AZH2011

Panasonic Industrial Automation SalesIn Stock: 960AZH2011 Datasheet

Current PartRFQ

D4E-1C20N

Omron Automation and SafetyIn Stock: 78818D4E-1C20N Datasheet

SimilarRFQ

D4E-1F20N

Omron Automation and SafetyIn Stock: 824D4E-1F20N Datasheet

SimilarRFQ

D4E-2F20N

Omron Automation and SafetyIn Stock: 927D4E-2F20N Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AZH2011 is determined by matching the following critical parameters: SPDT circuit configuration, On-Momentary switch function, 5A current rating at 125V AC, round pin plunger actuator type, chassis mount configuration, screw terminal termination, IP67 ingress protection rating, identical operating force (1200gf) and release force (500gf), and operating position of 1.180" (30.0mm). All substitute parts must maintain the same operating temperature range (-10°C to 80°C) and mechanical life specification (10,000,000 cycles).

The substitute parts identified are:

D4E-1F20N - Matches all critical parameters including 5A current rating, 125V AC voltage, chassis mount, and identical mechanical specifications.

D4E-1C20N - Matches electrical and mechanical specifications but uses panel mount configuration instead of chassis mount, requiring design layout adjustment.

D4E-2F20N - Shares mounting type and mechanical specifications but operates at 100mA current rating, suitable only for low-current applications.

Parameter Comparison

Engineering Selection Recommendations

D4E-1F20N is the primary substitute for direct replacement of the AZH2011. This part maintains identical electrical ratings (5A at 125V AC), mechanical specifications (1200gf operating force, 1.180" operating position), and chassis mount configuration. The D4E-1F20N carries RoHS Compliant status and demonstrates extended electrical life (500,000 cycles versus 100,000 cycles), providing enhanced reliability for equivalent or reduced operational stress.

D4E-1C20N is functionally equivalent in electrical and mechanical performance but requires design modification due to panel mount configuration. This part is suitable only when PCB or panel mounting can be accommodated in place of chassis mounting. ROHS3 Compliant status is noted.

D4E-2F20N is not suitable as a direct substitute due to reduced current rating (100mA versus 5A). This part is applicable only in applications where load current does not exceed 100mA. Electrical life specification is not provided for this variant.

Frequently Asked Questions (FAQ)

Q: Can D4E-1F20N replace AZH2011 without design changes? A: Yes. D4E-1F20N matches all critical electrical and mechanical parameters, including 5A current rating, 125V AC voltage, chassis mount configuration, and identical operating position (1.180"). No design modification is required.

Q: What is the difference between D4E-1F20N and D4E-1C20N? A: Both parts share identical electrical ratings and mechanical specifications. The primary difference is mounting type: D4E-1F20N is chassis mount (matching AZH2011), while D4E-1C20N is panel mount. Selection depends on PCB layout and mounting requirements.

Q: Why is D4E-2F20N listed as a substitute if the current rating differs? A: D4E-2F20N is listed based on provided input data but is not suitable for applications requiring 5A operation. This part is applicable only for low-current applications (100mA maximum). Current rating is a critical selection parameter.

Q: Are all substitute parts RoHS compliant? A: Yes. AZH2011 is RoHS Compliant. D4E-1F20N is RoHS Compliant. D4E-1C20N and D4E-2F20N are ROHS3 Compliant. All parts meet RoHS requirements.

Q: What is the operating position difference between AZH2011 and D4E-1C20N? A: AZH2011 and D4E-1F20N both operate at 1.180" (30.0mm). D4E-1C20N operates at 1.000" (25.4mm). This difference may affect actuator engagement depth and should be considered during mechanical design review.

Q: Do all parts have the same ingress protection rating? A: Yes. All parts listed (AZH2011, D4E-1F20N, D4E-1C20N, D4E-2F20N) carry IP67 ingress protection rating (dust tight, waterproof).