AYF531465 Equivalent & Substitute Parts

Part Overview

The AYF531465 is a 14-position FPC (Flat Flexible Connector) manufactured by Panasonic Electric Works, designed for surface mount, right-angle applications with 0.5mm pitch contacts. This connector features top and bottom contact configuration, flip lock and backlock locking mechanisms, and is rated for 0.5A per contact at 50V. The part is currently active in production with RoHS compliance and unlimited moisture sensitivity level (MSL 1). Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same connector series and specifications.

Substiute Parts

AYF531465

Panasonic Electric WorksIn Stock: 1036AYF531465 Datasheet

Current PartRFQ

AYF531465T

Panasonic Electric WorksIn Stock: 1959AYF531465T Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AYF531465 is determined by strict equivalence across the following critical parameters:

• Connector category: FFC, FPC (Flat Flexible) Connectors
• Series designation: Y5BW
• Number of positions: 14
• Pitch specification: 0.020" (0.50mm)
• Mounting configuration: Surface Mount, Right Angle
• Contact arrangement: Contacts, Top and Bottom
• Electrical ratings: 50V voltage, 0.5A per contact
• Operating temperature range: -55°C ~ 85°C
• Locking mechanism: Flip Lock, Backlock
• Termination method: Solder
• Housing and actuator material: Liquid Crystal Polymer (LCP)
• Flammability rating: UL94 V-0
• Mating cycles: 20

The substitute part AYF531465T maintains all critical electrical and mechanical parameters, differing only in packaging designation and regulatory compliance documentation. Both parts are manufactured by Panasonic Electric Works within the same Y5BW series.

Parameter Comparison

Engineering Selection Recommendations

Both AYF531465 and AYF531465T are active production parts from Panasonic Electric Works with full RoHS compliance. The AYF531465T carries ROHS3 compliance designation, representing current regulatory documentation. Both parts meet UL94 V-0 flammability requirements and maintain identical electrical performance specifications across voltage, current, and temperature operating ranges.

Selection between these parts should be based on supply chain availability and regulatory documentation requirements for the target application. The AYF531465T offers higher current inventory availability (1900 pcs vs. 987 pcs) and updated compliance documentation. Both parts are suitable for applications requiring 14-position FPC connectors with 0.5mm pitch in surface mount, right-angle configurations.

Frequently Asked Questions (FAQ)

Q: Can AYF531465T be used as a direct replacement for AYF531465?

A: Yes. Both parts maintain identical electrical ratings (50V, 0.5A per contact), mechanical dimensions (14 positions, 0.5mm pitch, 1.00mm height), locking mechanisms (flip lock, backlock), and operating temperature range (-55°C ~ 85°C). The parts are functionally equivalent for PCB assembly and signal integrity applications.

Q: What is the difference between AYF531465 and AYF531465T?

A: The primary differences are packaging designation and RoHS compliance documentation. AYF531465T carries ROHS3 compliance and represents the current production variant. Both parts are manufactured within the same Y5BW series by Panasonic Electric Works.

Q: Are there any mechanical compatibility concerns when substituting these parts?

A: No. Both connectors feature identical mounting type (surface mount, right angle), contact arrangement (top and bottom), FFC thickness (0.30mm), and height above board (1.00mm). PCB footprints and assembly processes remain unchanged.

Q: What is the significance of the MSL 1 rating?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life without moisture control requirements. Both parts carry this rating, eliminating moisture-related storage or handling constraints.

Q: Are both parts RoHS compliant?

A: Yes. AYF531465 is RoHS Compliant, and AYF531465T is ROHS3 Compliant. Both meet current environmental and hazardous substance restrictions for electronic components.