AXW3101431A Equivalent & Substitute Parts

Part Overview

The AXW3101431A is a 10-position rectangular socket connector manufactured by Panasonic Electric Works. This connector features crimp termination for discrete wiring with 26-28 AWG wire gauge, gold-plated contacts, and a 0.100" (2.54mm) pitch configuration in a 2-row layout. The product is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing system maintenance and new design implementations where legacy compatibility is required.

Substiute Parts

AXW3101431A

Panasonic Electric WorksIn Stock: 1003AXW3101431A Datasheet

Current PartRFQ

5-102393-3

TE Connectivity AMP ConnectorsIn Stock: 7625-102393-3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AXW3101431A is determined by the following critical parameters:

• Connector geometry: 10 positions, 2 rows, 0.100" (2.54mm) pitch and row spacing
• Electrical interface: Female socket contact type with gold plating
• Mechanical compatibility: Free hanging in-line mounting configuration
• Wire compatibility: Support for 26-28 AWG discrete wire termination

The substitute part 5-102393-3 (TE Connectivity AMP Connectors) satisfies these core requirements. While this substitute employs IDC (Insulation Displacement Contact) termination rather than crimp termination, it maintains mechanical and electrical compatibility with the same pitch, position count, row configuration, and contact finish. The IDC termination method accommodates wire gauges within the 26-30 AWG range, which overlaps with the original 26-28 AWG specification. The substitute's support for both discrete and ribbon cable provides additional application flexibility.

Parameter Comparison

Engineering Selection Recommendations

The AXW3101431A is obsolete, and the 5-102393-3 is an active product from a major connector manufacturer. Selection of the substitute should be based on the following engineering considerations:

Product Status: The substitute part is actively manufactured and supported, ensuring long-term availability and supply chain stability compared to the obsolete main part.

Compliance: The substitute meets ROHS3 compliance requirements, which may be mandatory for new designs or systems subject to environmental regulations. The main part's compliance status is not specified.

Termination Method Transition: The primary difference is the shift from crimp to IDC termination. IDC termination eliminates the need for separate crimping tools and provides consistent contact pressure through the connector body. This method is suitable for applications where discrete wire or ribbon cable is used.

Wire Gauge Compatibility: The substitute's 26-30 AWG range encompasses the original 26-28 AWG specification, ensuring compatibility with existing wiring practices.

Contact Finish: Both parts feature gold plating. The substitute specifies a contact finish thickness of 30.0µin (0.76µm), providing defined corrosion resistance and electrical performance characteristics.

Frequently Asked Questions (FAQ)

Q: Can the 5-102393-3 directly replace the AXW3101431A in existing assemblies?

A: Mechanical and electrical compatibility is maintained due to identical pitch, position count, row configuration, and contact type. The primary consideration is the termination method: the substitute uses IDC termination instead of crimp. If the existing assembly uses pre-crimped contacts, the connector body can be replaced, but the termination process for new wire connections will differ.

Q: What is the difference between crimp and IDC termination?

A: Crimp termination requires a separate crimping tool to attach individual contacts to wire ends before insertion into the connector. IDC termination integrates the contact and termination into the connector body; wire is inserted directly into the connector, and contact pressure is applied by the connector structure. IDC termination is faster and does not require separate contact assembly.

Q: Does the substitute support ribbon cable?

A: Yes. The 5-102393-3 supports both discrete wire and ribbon cable. The original AXW3101431A is specified for discrete wire only. This additional capability does not affect compatibility with discrete wire applications.

Q: Are there packaging differences between the main part and substitute?

A: The main part packaging is not specified. The substitute is supplied in trays. Packaging format may affect handling, storage, and integration into assembly processes but does not affect electrical or mechanical performance.

Q: What is the significance of the Moisture Sensitivity Level (MSL) rating?

A: Both parts carry an MSL rating of 1 (Unlimited), indicating no moisture sensitivity. These connectors do not require special moisture control during storage or handling and can be used in standard industrial environments.

Q: Is the substitute RoHS compliant?

A: Yes, the 5-102393-3 is ROHS3 compliant. The main part's RoHS status is not specified. For applications subject to RoHS requirements, the substitute is the appropriate choice.