AXN424C330P Equivalent & Substitute Parts

Part Overview

The AXN424C330P is a 24-position connector header manufactured by Panasonic Electric Works, designed for surface mount applications with outer shroud contacts and gold plating. This part operates in the P8 series and features a 0.031" (0.80mm) pitch configuration across 2 rows. The product is currently classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing design support and procurement planning.

Substiute Parts

AXN424C330P

Panasonic Electric WorksIn Stock: 1083AXN424C330P Datasheet

Current PartRFQ

AXK6S24447YG

Panasonic Electric WorksIn Stock: 673AXK6S24447YG Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AXN424C330P is determined by the following critical parameters:

• Connector Type: Header with outer shroud contacts (maintains mechanical and electrical interface compatibility)
• Number of Positions: 24 positions (required for pin count matching)
• Number of Rows: 2 rows (required for contact layout compatibility)
• Mounting Type: Surface mount (required for PCB assembly process compatibility)
• Contact Finish: Gold (required for electrical performance and corrosion resistance)
• Manufacturer: Panasonic Electric Works (ensures design and quality consistency)

The AXK6S24447YG qualifies as a substitute based on these core parameters. However, differences in pitch (0.020" vs. 0.031"), height above board (0.130" vs. 0.107"), and mated stacking heights introduce design considerations that must be evaluated for specific applications.

Parameter Comparison

Engineering Selection Recommendations

The AXK6S24447YG is an active product from Panasonic Electric Works that maintains functional equivalence to the obsolete AXN424C330P across core connector specifications: 24-position header configuration, outer shroud contact design, surface mount assembly, and gold contact finish.

The substitute part carries RoHS compliance certification, providing regulatory advantage for new designs and procurement cycles. Both parts share identical moisture sensitivity classification (MSL 1), ensuring equivalent handling and storage requirements.

Design integration requires evaluation of pitch-dependent factors: the AXK6S24447YG operates at 0.020" (0.50mm) pitch versus the original 0.031" (0.80mm) pitch, resulting in a more compact footprint. The substitute part exhibits 0.023" (0.58mm) greater height above board, which may affect clearance in space-constrained applications.

Frequently Asked Questions (FAQ)

Q: Can the AXK6S24447YG directly replace the AXN424C330P without PCB redesign?

A: Direct replacement requires PCB footprint modification. The pitch difference (0.020" vs. 0.031") necessitates new land pattern design. The increased height above board (0.130" vs. 0.107") must be evaluated against component clearance constraints.

Q: What are the mated stacking height implications?

A: The AXN424C330P supports mated stacking heights of 3mm, 4.6mm, and 6mm. The AXK6S24447YG supports 4mm, 4.5mm, and 7mm. Connector stack configurations must be verified against application requirements.

Q: Does the AXK6S24447YG meet current regulatory requirements?

A: Yes. The AXK6S24447YG is RoHS compliant and carries active product status, supporting current procurement and design qualification processes.

Q: Are both parts equivalent in electrical performance?

A: Both parts feature gold contact finish and identical MSL classification. Electrical performance is determined by contact material, finish, and environmental protection—all equivalent between the two parts.

Q: What packaging format is available for the substitute part?

A: The AXK6S24447YG is supplied in Tape & Reel (TR) packaging, suitable for automated assembly processes.