AXN350130P Equivalent & Substitute Parts

Part Overview

The AXN350130P is a 50-position rectangular connector socket manufactured by Panasonic Electric Works, designed for surface mount applications with center strip contacts and gold plating. This component is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing production support and design continuity. The part operates within unlimited moisture sensitivity parameters and complies with EAR99 export classification standards.

Substiute Parts

AXN350130P

Panasonic Electric WorksIn Stock: 1046AXN350130P Datasheet

Current PartRFQ

AXK5S50347YG

Panasonic Electric WorksIn Stock: 7310AXK5S50347YG Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AXN350130P is determined by the following critical parameters:

• Connector Type: Socket with center strip contacts (functional requirement)
• Number of Positions: 50 positions (electrical requirement)
• Number of Rows: 2 rows (physical layout requirement)
• Mounting Type: Surface mount (assembly requirement)
• Contact Finish: Gold plating (electrical performance requirement)

The substitute part AXK5S50347YG shares the same connector type, position count, row configuration, mounting method, and contact finish. However, it operates at a different pitch specification (0.020" versus 0.031"), which represents a fundamental geometric difference. This pitch variation affects PCB footprint design, mating interface compatibility, and overall form factor. Substitution is therefore conditional upon PCB redesign to accommodate the different pitch specification.

Parameter Comparison

Engineering Selection Recommendations

The AXK5S50347YG represents an active-status alternative to the obsolete AXN350130P. Both components maintain identical moisture sensitivity classification and export compliance under EAR99. The substitute part provides enhanced regulatory compliance through RoHS3 certification and REACH unaffected status, supporting modern supply chain requirements.

Direct pin-for-pin substitution is not possible due to pitch specification differences (0.80mm versus 0.50mm). Implementation of AXK5S50347YG requires PCB footprint modification and connector interface redesign. The increased height above board (6.05mm versus 2.70mm) must be evaluated against available assembly space and mating component clearance.

Selection between these parts depends on design flexibility and production timeline. The substitute part offers superior long-term availability through active manufacturing status and improved regulatory alignment.

Frequently Asked Questions (FAQ)

Q: Can AXK5S50347YG be used as a direct replacement without PCB modification?

A: No. The pitch difference (0.031" to 0.020") requires PCB footprint redesign. Direct substitution without layout changes will result in misalignment and connection failure.

Q: What is the significance of the pitch specification difference?

A: Pitch defines the center-to-center distance between adjacent contact positions. A change from 0.80mm to 0.50mm alters the overall connector footprint dimensions and requires corresponding changes to the PCB pad pattern and mating connector interface.

Q: Does the height difference affect assembly compatibility?

A: Yes. The substitute part extends 6.05mm above the board compared to 2.70mm for the original part. Clearance verification is required for components, shields, or enclosures positioned above the connector.

Q: Are both parts compliant with current regulatory standards?

A: The substitute part AXK5S50347YG carries RoHS3 and REACH compliance certifications. The original AXN350130P, being obsolete, may not meet current regulatory requirements for new designs.

Q: What is the inventory status for each part?

A: AXN350130P has 1017 units in stock (obsolete status). AXK5S50347YG has 7211 units available (active status), providing superior long-term supply assurance.

Q: Are there any differences in packaging between these parts?

A: The original part packaging is unspecified. The substitute part is supplied in Tape & Reel (TR) format, standard for high-volume surface mount assembly operations.