AXN320130P Equivalent & Substitute Parts

Part Overview

The AXN320130P is a 20-position rectangular connector socket manufactured by Panasonic Electric Works, designed for surface mount applications with center strip contacts and gold plating. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing production and maintenance applications. The connector features a 0.031" (0.80mm) pitch configuration with dual-row arrangement and board guide features, operating at multiple mated stacking heights ranging from 6mm to 14mm.

Substiute Parts

AXN320130P

Panasonic Electric WorksIn Stock: 1070AXN320130P Datasheet

Current PartRFQ

AXK5S20347YG

Panasonic Electric WorksIn Stock: 1258AXK5S20347YG Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AXN320130P is constrained by the following critical parameters that must align between the main part and any substitute:

• Connector Type: Socket with center strip contacts (functional requirement)
• Number of Positions: 20 positions (pin count requirement)
• Number of Rows: 2 rows (physical layout requirement)
• Mounting Type: Surface mount (assembly process requirement)
• Contact Finish: Gold plating (electrical and corrosion resistance requirement)
• Manufacturer: Panasonic Electric Works (supply chain and design compatibility)

The identified substitute part AXK5S20347YG shares the core functional characteristics of socket type, 20-position configuration, dual-row layout, surface mount capability, and gold contact finish. However, this substitute operates at a different pitch specification (0.020" versus 0.031"), which represents a fundamental geometric difference that must be evaluated against specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

The AXK5S20347YG represents the available substitute from Panasonic Electric Works for the obsolete AXN320130P. Selection of this substitute requires verification that the application can accommodate the following geometric and electrical differences:

Pitch Difference: The substitute operates at 0.020" (0.50mm) pitch versus the original 0.031" (0.80mm) pitch. This represents a significant reduction in contact spacing and requires confirmation that the mating connector and PCB layout can support the finer pitch specification.

Height Variation: The substitute exhibits a height above board of 0.238" (6.05mm) compared to the original 0.106" (2.70mm). This increased profile must be evaluated against available board clearance and enclosure constraints.

Stacking Height Range: The substitute supports mated stacking heights of 7mm, 8mm, and 9mm, whereas the original supported 6mm through 14mm. Compatibility with existing mating connectors must be confirmed within the overlapping range of 7mm and 8mm.

Compliance Status: The substitute is ROHS3 compliant and carries active product status, ensuring ongoing availability and regulatory alignment for new designs and production continuity.

Frequently Asked Questions (FAQ)

Q: Can the AXK5S20347YG be used as a direct replacement for the AXN320130P?

A: Direct replacement is not possible without design modification. The pitch difference (0.020" versus 0.031") requires corresponding changes to the mating connector and PCB footprint. The increased height above board must also be verified against available clearance.

Q: What are the critical parameters that determine substitution compatibility?

A: Substitution compatibility is determined by connector type (socket with center strip contacts), position count (20), row configuration (2 rows), mounting method (surface mount), and contact finish (gold). Pitch and height specifications must be evaluated separately against application constraints.

Q: Are there compliance differences between the main part and substitute?

A: The substitute is ROHS3 compliant with active product