AXK850245WG Equivalent & Substitute Parts

Part Overview

The AXK850245WG is a 50-position rectangular connector header manufactured by Panasonic Electric Works, designed for surface mount applications. This connector features outer shroud contacts with gold plating and is part of the P4 series. The part is currently active in production with 880 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when packaging requirements differ.

Substiute Parts

AXK850245WG

Panasonic Electric WorksIn Stock: 901AXK850245WG Datasheet

Current PartRFQ

AXK850245WA

Panasonic Electric WorksIn Stock: 1144AXK850245WA Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AXK850245WG is determined by strict equivalence across the following critical parameters:

• Connector type: Header with outer shroud contacts
• Number of positions: 50
• Pitch: 0.016" (0.40mm)
• Number of rows: 2
• Mounting type: Surface mount
• Contact finish: Gold
• Height above board: 0.089" (2.26mm)
• Mated stacking heights: 3mm, 4.6mm
• Series: P4
• Base product number: AXK850245

The identified substitute part AXK850245WA meets all electrical and mechanical parameters required for direct substitution. The primary difference between these parts is packaging format: AXK850245WG is supplied in Tape & Reel (TR) format, while AXK850245WA is supplied in Strip format.

Parameter Comparison

Engineering Selection Recommendations

Both AXK850245WG and AXK850245WA are active production parts from Panasonic Electric Works with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and compliance certifications applicable to the end application.

AXK850245WG in Tape & Reel format is suitable for high-volume automated assembly processes. AXK850245WA in Strip format is appropriate for lower-volume applications or manual assembly workflows.

Both parts maintain RoHS compliance. AXK850245WA carries ROHS3 certification and REACH Unaffected status, providing additional regulatory documentation for applications requiring enhanced compliance verification.

Frequently Asked Questions (FAQ)

Q: Can AXK850245WA be used as a direct replacement for AXK850245WG?

A: Yes. Both parts share identical electrical and mechanical specifications including connector type, position count, pitch, mounting type, contact finish, and board height. The difference is packaging format only.

Q: What is the difference between Tape & Reel and Strip packaging?

A: Tape & Reel (TR) packaging is designed for automated pick-and-place assembly equipment and is standard for high-volume production. Strip packaging is suitable for manual assembly or lower-volume applications where automated handling is not required.

Q: Are there any compliance differences between these parts?

A: Both parts are RoHS compliant. AXK850245WA carries additional ROHS3 certification and REACH Unaffected status. Applications requiring specific regulatory documentation should reference the applicable certification for each part number.

Q: What is the Moisture Sensitivity Level (MSL) for these connectors?

A: Both parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Are these parts interchangeable in terms of mating height?

A: Yes. Both parts support identical mated stacking heights of 3mm and 4.6mm, ensuring compatibility with corresponding connector receptacles.