AXK750417G Equivalent & Substitute Parts

Part Overview

The AXK750417G is a 50-position rectangular connector socket manufactured by Panasonic Electric Works, designed for surface mount applications with center strip and outer edge contacts. This connector features gold-plated contacts and board guide with solder retention capabilities. The part is currently classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing production support and design continuity.

Substiute Parts

AXK750417G

Panasonic Electric WorksIn Stock: 830AXK750417G Datasheet

Current PartRFQ

AXK750117G

Panasonic Electric WorksIn Stock: 734AXK750117G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AXK750417G is determined by strict alignment of the following critical parameters:

• Connector type: Socket with center strip and outer edge contacts
• Number of positions: 50
• Pitch: 0.016" (0.40mm)
• Number of rows: 2
• Mounting type: Surface mount
• Contact finish: Gold
• Series: P4
• Features: Board guide and solder retention

The AXK750117G qualifies as a direct substitute based on matching all electrical and mechanical parameters. The primary distinction is the mated stacking height (1.5mm versus 4.6mm) and height above board (0.059" versus 0.115"), which reflects a design variation within the same connector family. The substitute part is active in production status and carries RoHS compliance certification.

Parameter Comparison

Engineering Selection Recommendations

The AXK750117G is the designated substitute for the obsolete AXK750417G. Both parts maintain identical electrical specifications, contact configuration, and pitch geometry. The substitute part is currently in active production status with RoHS compliance certification, ensuring long-term availability and regulatory alignment.

The primary design difference is the reduced mated stacking height and height above board in the AXK750117G. This dimensional variation must be evaluated against specific PCB layout and enclosure constraints. If the original design accommodates the lower profile, the AXK750117G provides a direct functional replacement with improved compliance status.

Frequently Asked Questions (FAQ)

Q: Can AXK750117G directly replace AXK750417G in existing designs?

A: Electrical and mechanical compatibility is confirmed across all contact positions, pitch, and connector type specifications. However, the reduced stacking height (1.5mm versus 4.6mm) and lower profile above board (0.059" versus 0.115") require verification against PCB layout and mating component clearances.

Q: What is the difference in packaging between these parts?

A: The AXK750417G is supplied in standard packaging, while the AXK750117G is supplied in Tape & Reel (TR) format. Tape & Reel packaging is standard for high-volume surface mount assembly operations.

Q: Are both parts RoHS compliant?

A: The AXK750117G carries RoHS compliance certification. The AXK750417G, being obsolete, does not carry this designation in the provided specifications.

Q: What is the inventory status for these parts?

A: The AXK750417G has 816 pieces in stock as new original inventory. The AXK750117G has 670 pieces in stock as new original inventory.

Q: Are there any differences in moisture sensitivity?

A: Both parts carry MSL 1 (Unlimited) classification, indicating no moisture sensitivity constraints for storage or handling.