AXH010A0X3Z Equivalent & Substitute Parts Reference

Part Overview

The OmniOn Power AXH010A0X3Z is a DC-DC Converter module categorized as a Non-Isolated Point-of-Load (PoL) Module. It provides a single output voltage range of 0.8V to 3.6V up to 10A, with an input voltage range of 3V to 5.5V. This product is classified as obsolete, making identification of suitable substitute parts essential for maintaining system compatibility and ensuring ongoing support in designs where this module is specified.

Substiute Parts

AXH010A0X3Z

OmniOn PowerIn Stock: 893AXH010A0X3Z Datasheet

Current PartRFQ

YNV05T10-0G

Bel Power SolutionsIn Stock: 896YNV05T10-0G Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute compatibility is established directly by matching the following key parameters: module type, number of outputs, input voltage range, output voltage range, output current rating, wattage, application, features, operating temperature, mounting type, package, size/dimension, control features, and compliance parameters. Only substitute parts conforming strictly to these provided specifications are included in this reference.

Parameter Comparison

Engineering Selection Recommendations

The AXH010A0X3Z is classified as obsolete, while the substitute part YNV05T10-0G is listed as active. Both parts maintain equivalent functional and compliance parameters, including RoHS3 and REACH unaffected status for the substitute. Their ECCN and HTSUS codes are identical. The selection is justified based on the active product status and matching compliance reporting.

Frequently Asked Questions (FAQ)

Q1: What parameters must match for substituting DC-DC converter modules in this category?
A1: Substitution requires strict equivalency of type, input and output voltage range, output current, power rating, mounting type, package, operating temperature, features, and compliance parameters.

Q2: Can the YNV05T10-0G replace the AXH010A0X3Z in existing designs?
A2: All provided key parameters match, including electrical ratings, features, and mechanical interface, qualifying it for substitution.

Q3: Are there any differences in physical size or mounting style?
A3: Both use a 10-SIP Module with Through Hole mounting, with minor dimensional differences as specified: the substitute is 2.00" L x 0.28" W x 0.54" H compared to the main part's 2.00" L x 0.32" W x 0.50" H.

Q4: Does the substitute part meet similar compliance certifications?
A4: Both parts share ECCN EAR99 and HTSUS 8504.40.9580 designations. The YNV05T10-0G also maintains ROHS3 compliance and REACH unaffected status.

Q5: What features are supported for both modules?
A5: Both modules support Remote On/Off, Over Current Protection (OCP), Over Temperature Protection (OTP), and Under Voltage Lock Out (UVLO), with Enable, Active High control.