AXG816044A Equivalent & Substitute Parts

Part Overview

The AXG816044A is a 16-position rectangular connector plug manufactured by Panasonic Electric Works, designed for surface mount applications with outer shroud contacts and gold plating. This component is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing production and maintenance applications. The part operates within the A35US series and maintains full RoHS compliance with MSL 1 rating, indicating unlimited moisture sensitivity tolerance.

Substiute Parts

AXG816044A

Panasonic Electric WorksIn Stock: 1226AXG816044A Datasheet

Current PartRFQ

AXF6D1612

Panasonic Electric WorksIn Stock: 710AXF6D1612 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AXG816044A is determined by strict alignment of the following electrical and mechanical parameters:

• Connector Configuration: 16 positions, 2-row arrangement with 0.014" (0.35mm) pitch spacing
• Physical Interface: Surface mount mounting type with 0.6mm mated stacking height and 0.018" (0.46mm) height above board
• Contact Properties: Gold finish for signal integrity and corrosion resistance
• Compliance Requirements: RoHS compliance and MSL 1 rating for manufacturing process compatibility
• Manufacturer Consistency: Panasonic Electric Works maintains series compatibility within the A35 connector family

The AXF6D1612 qualifies as a substitute based on matching all critical parameters. The primary distinction is connector type classification (header versus plug) and series designation (A35UH versus A35US), which represent complementary mating halves within the same connector family architecture.

Parameter Comparison

Engineering Selection Recommendations

The AXF6D1612 represents the primary substitute for the obsolete AXG816044A based on electrical and mechanical parameter alignment. Both components maintain identical pitch spacing, position count, stacking heights, and contact finish specifications. The AXF6D1612 carries active product status, ensuring continued availability and manufacturing support, whereas the AXG816044A is classified as obsolete.

Both parts satisfy RoHS compliance requirements and MSL 1 moisture sensitivity specifications, supporting equivalent manufacturing process integration. The AXF6D1612 is supplied in Tape & Reel packaging, which aligns with modern surface mount assembly workflows compared to the strip packaging of the main part.

The connector type distinction (header versus plug) reflects complementary mating halves within the A35 connector family. Selection between these components depends on circuit board design requirements: the plug configuration (AXG816044A) interfaces with receptacle housings, while the header configuration (AXF6D1612) interfaces with plug housings. Both maintain mechanical and electrical compatibility within their respective mating pair designations.

Frequently Asked Questions (FAQ)

Q: Can the AXF6D1612 directly replace the AXG816044A in existing designs?

A: The AXF6D1612 matches all critical electrical and mechanical parameters (pitch, position count, stacking height, contact finish, and compliance ratings). However, connector type differs: AXG816044A is a plug configuration while AXF6D1612 is a header configuration. Direct replacement requires that the mating connector on the circuit board is compatible with the header type. If the existing design uses a plug receptacle, the AXF6D1612 will not mate directly.

Q: What is the significance of the connector type difference between plug and header?

A: Plug and header designations indicate mating interface orientation. A plug connector (AXG816044A) inserts into a receptacle housing. A header connector (AXF6D1612) receives a plug connector. These are complementary halves of the same connector family. Selection depends on whether your application requires the plug or header half of the mating pair.

Q: Are there packaging considerations when transitioning from AXG816044A to AXF6D1612?

A: The AXG816044A is supplied in strip packaging, while the AXF6D1612 uses Tape & Reel (TR) packaging. Tape & Reel packaging is standard for automated surface mount assembly processes and typically offers improved handling efficiency and component protection during manufacturing.

Q: Do both parts meet the same compliance and moisture sensitivity requirements?

A: Yes. Both the AXG816044A and AXF6D1612 are RoHS compliant and carry MSL 1 ratings, indicating unlimited moisture sensitivity tolerance. This ensures equivalent performance in manufacturing environments and storage conditions.

Q: Why is the AXG816044A classified as obsolete?

A: Obsolete status indicates the manufacturer has discontinued production. The AXF6D1612 maintains active product status, ensuring continued availability, technical support, and manufacturing consistency for new designs and ongoing production requirements.