AXE834124 Equivalent & Substitute Parts Reference

Part Overview

The AXE834124 is a 34-position rectangular connector header manufactured by Panasonic Electric Works, designed for surface mount applications with center strip contacts and gold plating. This component is classified as an active product with full RoHS compliance and unlimited moisture sensitivity rating. Substitute parts are identified when packaging configurations differ or when inventory availability requires alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

AXE834124

Panasonic Electric WorksIn Stock: 1044AXE834124 Datasheet

Current PartRFQ

AXE834124A

Panasonic Electric WorksIn Stock: 1240AXE834124A Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The AXE834124A is identified as a direct substitute based on identical electrical and mechanical specifications. Substitution is valid when the following parameters match:

• Number of positions: 34
• Pitch: 0.014" (0.35mm)
• Number of rows: 2
• Connector type: Header, Center Strip Contacts
• Mounting type: Surface Mount
• Contact finish: Gold
• Mated stacking height: 0.8mm
• Height above board: 0.026" (0.65mm)
• Series: A35S
• Features: Solder Retention

The primary difference between AXE834124 and AXE834124A is packaging configuration: AXE834124 is supplied in bulk packaging, while AXE834124A is supplied in strip packaging. Both parts maintain identical form, fit, and function for circuit board integration.

Parameter Comparison

Engineering Selection Recommendations

Both AXE834124 and AXE834124A are active products with full regulatory compliance. AXE834124A carries ROHS3 compliance designation, while AXE834124 carries standard RoHS compliance. Both parts are REACH unaffected and classified under ECCN EAR99. Selection between these parts should be based on packaging requirements: bulk packaging for high-volume automated assembly processes, or strip packaging for lower-volume or manual assembly operations. Both configurations maintain identical electrical performance and mechanical compatibility within the A35S series connector family.

Frequently Asked Questions (FAQ)

Q: Can AXE834124A replace AXE834124 in production? A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format. Substitution is valid for any application using the AXE834124.

Q: What is the difference between bulk and strip packaging? A: Bulk packaging supplies loose components suitable for high-speed automated pick-and-place assembly. Strip packaging supplies components on continuous tape, typically used for lower-volume assembly or manual handling. Both deliver the same component specifications.

Q: Are there any compliance differences between these parts? A: Both parts are RoHS compliant and REACH unaffected. AXE834124A carries ROHS3 designation, indicating compliance with the most current RoHS directive revision. Both are suitable for applications requiring regulatory compliance.

Q: What are the critical dimensions for PCB layout? A: The connector requires 0.026" (0.65mm) clearance above the board surface. Mated stacking height is 0.8mm. Pitch between positions is 0.014" (0.35mm) across 34 positions in a 2-row configuration.

Q: Is moisture sensitivity a concern for storage? A: No. Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions for storage or handling.