AXE830124 Equivalent & Substitute Parts Reference

Part Overview

The AXE830124 is a 30-position rectangular connector header manufactured by Panasonic Electric Works, designed for surface mount applications with center strip contacts and gold plating. This component is classified as an active product with full RoHS compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same connector series, enabling procurement flexibility while preserving circuit board compatibility and performance specifications.

Substiute Parts

AXE830124

Panasonic Electric WorksIn Stock: 30220AXE830124 Datasheet

Current PartRFQ

AXE830124A

Panasonic Electric WorksIn Stock: 1168AXE830124A Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AXE830124 are qualified based on strict equivalence of the following critical parameters:

• Connector Type: Header, Center Strip Contacts
• Number of Positions: 30
• Pitch: 0.014" (0.35mm)
• Number of Rows: 2
• Mounting Type: Surface Mount
• Contact Finish: Gold
• Mated Stacking Height: 0.8mm
• Height Above Board: 0.026" (0.65mm)
• Series: A35S
• Manufacturer: Panasonic Electric Works

The identified substitute part AXE830124A maintains identical electrical and mechanical specifications across all critical parameters. Variations in packaging format (Tape & Reel versus Strip) do not affect functional compatibility, as the component itself remains unchanged.

Parameter Comparison

Engineering Selection Recommendations

Both AXE830124 and AXE830124A are active products manufactured by Panasonic Electric Works within the A35S connector series. The components are functionally equivalent for all circuit board applications requiring a 30-position surface mount header with 0.35mm pitch and gold-plated contacts.

The primary distinction between these parts is packaging format. AXE830124 is supplied in Tape & Reel format, suitable for automated assembly processes. AXE830124A is supplied in Strip format, appropriate for manual assembly or lower-volume production runs.

Both parts maintain RoHS compliance and unlimited moisture sensitivity rating (MSL 1), ensuring compatibility with standard PCB assembly and storage protocols. Selection between these substitutes should be based on production methodology and supply chain requirements rather than electrical or mechanical performance considerations.

Frequently Asked Questions (FAQ)

Q: Can AXE830124A be used as a direct replacement for AXE830124 in circuit board designs?

A: Yes. Both parts are electrically and mechanically identical. They share the same connector type, position count, pitch, mounting configuration, and contact specifications. Substitution is valid for all applications where AXE830124 is specified.

Q: What is the difference between Tape & Reel and Strip packaging?

A: Tape & Reel packaging is designed for automated pick-and-place assembly equipment, where components are fed continuously from a reel. Strip packaging contains individual components or small quantities arranged in a strip format, typically used for manual assembly or lower-volume applications. The connector component itself is identical in both formats.

Q: Are there compliance differences between AXE830124 and AXE830124A?

A: Both parts are RoHS compliant. AXE830124 carries RoHS Compliant status, while AXE830124A carries ROHS3 Compliant status. Both meet regulatory requirements for hazardous substance restrictions. AXE830124A additionally carries REACH Unaffected status, indicating compliance with chemical substance regulations.

Q: What does Moisture Sensitivity Level 1 mean?

A: MSL 1 indicates unlimited moisture sensitivity, meaning the component has no moisture-related storage or handling restrictions. Standard storage conditions are acceptable without special desiccant packaging or controlled humidity environments.

Q: Can these connectors be used interchangeably in existing PCB designs?

A: Yes. The identical pitch (0.35mm), position count (30), mounting type (surface mount), and physical dimensions (0.8mm stacking height, 0.026" height above board) ensure mechanical and electrical compatibility with existing PCB layouts and mating connectors.