AXE750124 Equivalent & Substitute Parts

Part Overview

The AXE750124 is a 50-position rectangular connector socket manufactured by Panasonic Electric Works, designed for surface mount applications with outer shroud contacts and gold plating. This component is classified as Active product status and is RoHS compliant. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling procurement flexibility and supply chain optimization.

Substiute Parts

AXE750124

Panasonic Electric WorksIn Stock: 959AXE750124 Datasheet

Current PartRFQ

AXE7E5026

Panasonic Electric WorksIn Stock: 6028AXE7E5026 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The AXE7E5026 qualifies as a parametric equivalent to the AXE750124 based on the following substitution criteria:

Matching Electrical Parameters:

• Number of Positions: 50
• Pitch: 0.014" (0.35mm)
• Number of Rows: 2
• Contact Finish: Gold
• Connector Type: Socket, Outer Shroud Contacts

Matching Mechanical Parameters:

• Mounting Type: Surface Mount
• Mated Stacking Heights: 0.8mm
• Height Above Board: 0.030" (0.75mm)
• Series: A35S

Matching Compliance Parameters:

• RoHS Status: RoHS Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• ECCN: EAR99
• HTSUS: 8536.69.4040

Differentiating Factor: The sole distinction between these parts is packaging format: AXE750124 is supplied in Bulk packaging, while AXE7E5026 is supplied in Tape & Reel (TR) format. Both parts are manufactured by Panasonic Electric Works and maintain Active product status.

Parameter Comparison

Engineering Selection Recommendations

Both AXE750124 and AXE7E5026 are Active products manufactured by Panasonic Electric Works with identical RoHS compliance and MSL ratings. Selection between these parts should be based on procurement and assembly requirements:

AXE750124 (Bulk Packaging): Suitable for applications requiring manual component handling, prototyping, or low-volume assembly operations where individual component access is prioritized.

AXE7E5026 (Tape & Reel Packaging): Appropriate for automated pick-and-place assembly processes, high-volume production runs, and applications where tape-and-reel format integrates with standard surface mount assembly equipment.

Both parts maintain identical electrical performance, mechanical fit, and regulatory compliance. The substitution decision is driven by manufacturing process requirements and supply chain logistics rather than functional capability.

Frequently Asked Questions (FAQ)

Q: Are AXE750124 and AXE7E5026 electrically interchangeable?

A: Yes. Both parts are identical in electrical specifications, including 50-position configuration, 0.014" (0.35mm) pitch, gold contact finish, and surface mount design. They perform identically in circuit applications.

Q: What is the primary difference between these two part numbers?

A: The packaging format differs. AXE750124 is supplied in Bulk packaging, while AXE7E5026 is supplied in Tape & Reel (TR) format. All other specifications remain identical.

Q: Can I use AXE7E5026 in place of AXE750124 in my assembly process?

A: Functional substitution is direct. However, assembly process compatibility depends on your manufacturing equipment. Bulk packaging suits manual assembly; Tape & Reel format is optimized for automated pick-and-place systems.

Q: Do both parts meet the same compliance standards?

A: Yes. Both AXE750124 and AXE7E5026 are RoHS compliant, carry MSL rating of 1 (Unlimited), and share identical ECCN and HTSUS classifications.

Q: Which part should I specify for high-volume production?

A: AXE7E5026 in Tape & Reel format is optimized for automated assembly processes typical in high-volume manufacturing. Bulk packaging (AXE750124) is less efficient for automated systems.

Q: Are there any mechanical differences between these connectors?

A: No. Both parts have identical mated stacking heights (0.8mm), height above board (0.030" / 0.75mm), and mounting specifications.