AXE430124 Equivalent & Substitute Parts

Part Overview

The AXE430124 is a 30-position connector header manufactured by Panasonic Electric Works, designed for surface mount applications with outer shroud contacts and gold plating. This component belongs to the A4F series of rectangular connectors and features solder retention for reliable PCB assembly.

The AXE430124 is classified as obsolete. Identifying equivalent and substitute parts is necessary to support ongoing production requirements, design revisions, and supply chain continuity when original inventory becomes unavailable.

Substiute Parts

AXE430124

Panasonic Electric WorksIn Stock: 1402AXE430124 Datasheet

Current PartRFQ

AXE4E3026

Panasonic Electric WorksIn Stock: 908AXE4E3026 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AXE430124 are identified based on strict parametric equivalence. The following criteria determine substitutability:

• Number of Positions: 30 (exact match required)
• Pitch: 0.016" (0.40mm) (exact match required)
• Number of Rows: 2 (exact match required)
• Connector Type: Header, Outer Shroud Contacts (exact match required)
• Mounting Type: Surface Mount (exact match required)
• Contact Finish: Gold (exact match required)
• Features: Solder Retention (exact match required)
• Mated Stacking Heights: 0.6mm (exact match required)
• Height Above Board: 0.018" (0.46mm) (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

The AXE4E3026 meets all parametric requirements for direct substitution.

Parameter Comparison

Engineering Selection Recommendations

The AXE4E3026 is the direct parametric equivalent to the AXE430124. Both components share identical electrical and mechanical specifications within the A4F series. The primary distinction is product status: the AXE430124 is obsolete while the AXE4E3026 is active in production.

The AXE4E3026 carries RoHS compliance certification, which provides additional regulatory alignment for applications subject to environmental standards. This substitute part is suitable for new designs and production continuity where the original AXE430124 is no longer available.

Frequently Asked Questions (FAQ)

Q: Can the AXE4E3026 be used as a direct replacement for the AXE430124?

A: Yes. The AXE4E3026 meets all parametric requirements for direct substitution, including position count, pitch, row configuration, connector type, mounting method, contact finish, and physical dimensions.

Q: What is the primary reason to transition from AXE430124 to AXE4E3026?

A: The AXE430124 is classified as obsolete. The AXE4E3026 is an active production part within the same A4F series, ensuring supply availability and long-term component sourcing.

Q: Are there any compliance differences between these parts?

A: The AXE4E3026 is certified RoHS compliant. RoHS compliance status is not specified for the AXE430124. For applications requiring RoHS certification, the AXE4E3026 provides documented compliance.

Q: Will PCB layout or assembly procedures require modification?

A: No. Both parts share identical mechanical and electrical specifications, including pitch, position count, mounting type, and stacking heights. Existing PCB designs and assembly procedures remain valid.

Q: Are inventory levels a consideration in part selection?

A: The AXE4E3026 has 883 units in stock, providing adequate supply for production requirements. The AXE430124 has 1324 units available but is obsolete and not recommended for new procurement.