AX5DBF4-600.0000T Equivalent & Substitute Parts

Part Overview

The AX5DBF4-600.0000T is a 600 MHz XO (Standard) LVDS Oscillator manufactured by Abracon LLC as part of the ClearClock™ AX5 series. This surface mount oscillator operates at 2.5V with Enable/Disable functionality and is housed in an 8-SMD, No Lead package. The part is currently Active in product status with full RoHS3 compliance and REACH unaffected certification. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to inventory constraints, procurement lead times, or design flexibility needs.

Substiute Parts

AX5DBF4-600.0000T

Abracon LLCIn Stock: 685AX5DBF4-600.0000T Datasheet

Current PartRFQ

AX5DBF1-600.0000T

Abracon LLCIn Stock: 1209AX5DBF1-600.0000T Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The AX5DBF1-600.0000T qualifies as a parametric equivalent to the AX5DBF4-600.0000T based on strict alignment of critical electrical and mechanical specifications. Substitution eligibility is determined by the following parameters:

• Frequency: 600 MHz (identical)
• Output Type: LVDS (identical)
• Supply Voltage: 2.5V (identical)
• Enable/Disable Function: Present (identical)
• Frequency Stability: ±20ppm (identical)
• Operating Temperature Range: -40°C ~ 85°C (identical)
• Maximum Supply Current: 80mA (identical)
• Package Type: 8-SMD, No Lead (identical)
• Package Dimensions: 5.00mm x 3.20mm x 1.50mm (identical)
• RoHS and REACH Compliance: ROHS3 Compliant, REACH Unaffected (identical)

The primary difference between these parts is packaging format: AX5DBF4-600.0000T is supplied in standard packaging, while AX5DBF1-600.0000T is available in Cut Tape (CT) & Digi-Reel® format. This distinction does not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the AX5DBF4-600.0000T and AX5DBF1-600.0000T are Active products from Abracon LLC with identical electrical and mechanical specifications. Selection between these parts should be based on procurement and assembly requirements:

• AX5DBF4-600.0000T: Use when standard packaging format is specified or preferred for inventory management.
• AX5DBF1-600.0000T: Use when Cut Tape (CT) & Digi-Reel® packaging is required for automated assembly processes or when higher inventory availability is needed (1152 Pcs vs. 626 Pcs in stock).

Both parts maintain full compliance with ROHS3 and REACH requirements, ensuring regulatory compatibility across applications. The identical MSL rating of 1 (Unlimited) indicates no moisture sensitivity constraints for either part.

Frequently Asked Questions (FAQ)

Q: Can AX5DBF1-600.0000T be used as a direct replacement for AX5DBF4-600.0000T?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Cut Tape & Digi-Reel® versus standard packaging). Pin configuration, electrical performance, and physical dimensions are identical, making them interchangeable at the component level.

Q: What is the difference between the packaging formats?

A: AX5DBF4-600.0000T uses standard packaging, while AX5DBF1-600.0000T is supplied in Cut Tape (CT) & Digi-Reel® format. Cut Tape packaging is optimized for automated pick-and-place assembly equipment, while standard packaging is suitable for manual handling and general inventory storage.

Q: Are there any compliance differences between these parts?

A: No. Both parts carry identical certifications: ROHS3 Compliant, REACH Unaffected, and MSL rating of 1 (Unlimited). They meet the same regulatory and environmental standards.

Q: Which part should I select for new designs?

A: Either part is suitable for new designs. Selection should be based on your assembly process requirements and packaging preferences. If using automated assembly, Cut Tape (CT) & Digi-Reel® format (AX5DBF1-600.0000T) is typically preferred.

Q: Are the electrical specifications identical?

A: Yes. Both parts operate at 600 MHz with LVDS output, 2.5V supply, ±20ppm frequency stability, 80mA maximum supply current, and -40°C ~ 85°C operating temperature range. All electrical parameters are identical.