AX5DBF2-600.0000T Equivalent & Substitute Parts

Part Overview

The AX5DBF2-600.0000T is a 600 MHz XO (Standard) LVDS Oscillator manufactured by Abracon LLC as part of the ClearClock™ AX5 series. This surface mount oscillator operates at 2.5V with Enable/Disable functionality and is housed in an 8-SMD, No Lead package. The part is currently Active in product status and maintains 1022 pieces in new original inventory stock.

Substitute parts are identified when design requirements necessitate alternative sourcing due to inventory constraints, supply chain considerations, or packaging format preferences while maintaining full electrical and mechanical compatibility.

Substiute Parts

AX5DBF2-600.0000T

Abracon LLCIn Stock: 1087AX5DBF2-600.0000T Datasheet

Current PartRFQ

AX5DBF1-600.0000T

Abracon LLCIn Stock: 1209AX5DBF1-600.0000T Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The AX5DBF1-600.0000T qualifies as a parametric equivalent substitute based on identical electrical and mechanical specifications across all critical selection criteria. Substitution is valid when the following parameters match exactly:

• Frequency: 600 MHz
• Output Type: LVDS
• Supply Voltage: 2.5V
• Function: Enable/Disable
• Frequency Stability: ±20ppm
• Operating Temperature Range: -40°C ~ 85°C
• Current - Supply (Max): 80mA
• Current - Supply (Disable) (Max): 70mA
• Mounting Type: Surface Mount
• Package / Case: 8-SMD, No Lead
• Physical Dimensions: 0.197" L x 0.126" W (5.00mm x 3.20mm)
• Height - Seated (Max): 0.059" (1.50mm)
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

The primary distinction between the main part and substitute is packaging format: AX5DBF2-600.0000T is supplied in standard packaging, while AX5DBF1-600.0000T is available in Cut Tape (CT) & Digi-Reel® format.

Parameter Comparison

Engineering Selection Recommendations

Both AX5DBF2-600.0000T and AX5DBF1-600.0000T are Active products from Abracon LLC with identical electrical performance and mechanical specifications. Selection between these parts is determined by packaging and supply chain requirements rather than technical performance.

AX5DBF2-600.0000T is appropriate for applications requiring standard packaging format with current inventory of 1022 pieces available.

AX5DBF1-600.0000T is appropriate for applications requiring Cut Tape (CT) & Digi-Reel® packaging format with current inventory of 1152 pieces available.

Both parts maintain full compliance with ROHS3, REACH Unaffected status, and MSL 1 (Unlimited) moisture sensitivity rating, ensuring equivalent regulatory and environmental performance.

Frequently Asked Questions (FAQ)

Q: Can AX5DBF1-600.0000T be used as a direct replacement for AX5DBF2-600.0000T?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format. AX5DBF1-600.0000T uses Cut Tape (CT) & Digi-Reel® packaging while AX5DBF2-600.0000T uses standard packaging. Pin configuration, electrical performance, and physical dimensions are identical.

Q: What parameters must match for substitution to be valid?

A: Frequency (600 MHz), output type (LVDS), supply voltage (2.5V), function (Enable/Disable), frequency stability (±20ppm), operating temperature range (-40°C ~ 85°C), current specifications, package type (8-SMD, No Lead), and physical dimensions must all match exactly.

Q: Are there any compliance differences between these parts?

A: No. Both parts are ROHS3 Compliant, REACH Unaffected, and carry MSL 1 (Unlimited) rating. Regulatory and environmental compliance is identical.

Q: Does packaging format affect circuit board layout or assembly?

A: No. Both parts have identical physical dimensions (0.197" L x 0.126" W, 5.00mm x 3.20mm) and height (0.059" maximum seated height). Packaging format affects only the supply and handling method, not the component itself or its placement on the circuit board.

Q: Which part should be selected for new designs?

A: Selection depends on procurement and assembly requirements. Standard packaging (AX5DBF2-600.0000T) is suitable for conventional pick-and-place assembly. Cut Tape & Digi-Reel® packaging (AX5DBF1-600.0000T) is suitable for high-volume automated assembly operations. Both are equally valid from an engineering perspective.