AX3PBF3-100.0000T3 Equivalent & Substitute Parts

Part Overview

The AX3PBF3-100.0000T3 is a 100 MHz XO (Standard) LVPECL oscillator manufactured by Abracon LLC, part of the ClearClock™ AX3 series. This component operates at 2.5V with enable/disable functionality and is housed in a 6-SMD, No Lead package. The part is currently active in production with 879 units in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required for design flexibility, supply chain continuity, or inventory management.

Substiute Parts

AX3PBF3-100.0000T3

Abracon LLCIn Stock: 940AX3PBF3-100.0000T3 Datasheet

Current PartRFQ

CP3225-100.000-2.5-25-X-T-TR

Raltron ElectronicsIn Stock: 892CP3225-100.000-2.5-25-X-T-TR Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AX3PBF3-100.0000T3 are qualified based on strict equivalence across the following critical parameters:

• Frequency: 100 MHz
• Output Type: LVPECL
• Supply Voltage: 2.5V
• Function: Enable/Disable
• Frequency Stability: ±25ppm
• Operating Temperature Range: -40°C ~ 85°C
• Current - Supply (Max): 50mA
• Package / Case: 6-SMD, No Lead
• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

The CP3225-100.000-2.5-25-X-T-TR from Raltron Electronics meets all specified electrical and mechanical requirements for direct substitution.

Parameter Comparison

Engineering Selection Recommendations

Both the AX3PBF3-100.0000T3 and CP3225-100.000-2.5-25-X-T-TR are active production components with ROHS3 compliance and REACH Unaffected status. The parts are electrically and mechanically equivalent across all specified parameters. The CP3225-100.000-2.5-25-X-T-TR exhibits a maximum seated height of 0.047" (1.20mm) compared to 0.043" (1.10mm) for the primary part; this 0.004" (0.10mm) difference is within typical PCB assembly tolerances and does not affect functional performance. Selection between these parts may be based on availability, supply chain requirements, or packaging preferences (Cut Tape & Digi-Reel® for the Raltron part).

Frequently Asked Questions (FAQ)

Q: Can the CP3225-100.000-2.5-25-X-T-TR be used as a direct replacement for the AX3PBF3-100.0000T3?

A: Yes. Both parts meet identical electrical specifications (100 MHz, LVPECL output, 2.5V supply, ±25ppm stability, -40°C ~ 85°C operating range) and share the same 6-SMD, No Lead package with matching footprint dimensions (0.126" L x 0.098" W).

Q: What is the significance of the height difference between these parts?

A: The CP3225-100.000-2.5-25-X-T-TR has a maximum seated height of 0.047" (1.20mm) versus 0.043" (1.10mm) for the AX3PBF3-100.0000T3. This 0.004" (0.10mm) difference is negligible for standard PCB assembly and does not impact electrical performance or board-level compatibility.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both the AX3PBF3-100.0000T3 and CP3225-100.000-2.5-25-X-T-TR are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory requirements.

Q: What packaging options are available for the substitute part?

A: The CP3225-100.000-2.5-25-X-T-TR is supplied in Cut Tape (CT) & Digi-Reel® packaging, providing flexibility for both manual and automated assembly workflows.

Q: Are the frequency stability specifications identical?

A: Yes. Both parts specify ±25ppm frequency stability, ensuring equivalent timing accuracy across the specified operating temperature range of -40°C ~ 85°C.