AX3PBF2-100.0000T3 Equivalent & Substitute Parts

Part Overview

The AX3PBF2-100.0000T3 is a 100 MHz XO (Standard) LVPECL oscillator manufactured by Abracon LLC, part of the ClearClock™ AX3 series. This component operates at 2.5V with Enable/Disable functionality and is housed in a 6-SMD, No Lead package. The part is currently Active in product status with 946 units in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required for design flexibility, supply chain continuity, or inventory management.

Substiute Parts

AX3PBF2-100.0000T3

Abracon LLCIn Stock: 992AX3PBF2-100.0000T3 Datasheet

Current PartRFQ

CP3225-100.000-2.5-25-X-T-TR

Raltron ElectronicsIn Stock: 892CP3225-100.000-2.5-25-X-T-TR Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AX3PBF2-100.0000T3 are qualified based on strict equivalence across the following critical parameters:

• Frequency: 100 MHz
• Output Type: LVPECL
• Supply Voltage: 2.5V
• Function: Enable/Disable
• Frequency Stability: ±25ppm
• Operating Temperature Range: -40°C ~ 85°C
• Current - Supply (Max): 50mA
• Package / Case: 6-SMD, No Lead
• Physical Dimensions: 0.126" L x 0.098" W (3.20mm x 2.50mm)
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The CP3225-100.000-2.5-25-X-T-TR from Raltron Electronics meets all specified electrical and mechanical requirements for direct substitution.

Parameter Comparison

Engineering Selection Recommendations

Both the AX3PBF2-100.0000T3 and CP3225-100.000-2.5-25-X-T-TR are Active products with full ROHS3 compliance and REACH Unaffected status. Selection between these parts may be based on availability, lead time, packaging format (the Raltron part is available in Cut Tape and Digi-Reel formats), or inventory requirements. The seated height difference of 0.004" (0.10mm) between the two parts is within typical PCB assembly tolerances and does not affect electrical performance or mechanical fit in standard surface mount applications.

Frequently Asked Questions (FAQ)

Q: Can the CP3225-100.000-2.5-25-X-T-TR be used as a direct replacement for the AX3PBF2-100.0000T3?

A: Yes. Both parts share identical electrical specifications (100 MHz, LVPECL output, 2.5V supply, ±25ppm stability, Enable/Disable function) and mechanical compatibility (6-SMD, No Lead package, 3.20mm x 2.50mm footprint). The seated height difference of 0.004" is negligible for PCB assembly.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts are ROHS3 Compliant, REACH Unaffected, and classified under ECCN EAR99 with identical HTSUS codes. Both carry MSL 1 (Unlimited) moisture sensitivity ratings.

Q: What is the difference in packaging availability?

A: The AX3PBF2-100.0000T3 is available in standard packaging, while the CP3225-100.000-2.5-25-X-T-TR is offered in Cut Tape (CT) and Digi-Reel formats, providing flexibility for different procurement and assembly workflows.

Q: Are the frequency stability and operating temperature ranges identical?

A: Yes. Both parts operate across -40°C to 85°C with ±25ppm frequency stability and support identical Enable/Disable functionality with 50mA maximum supply current.