AX3PBF2-100.0000 Equivalent & Substitute Parts

Part Overview

The AX3PBF2-100.0000 is a 100 MHz XO (Standard) LVPECL oscillator manufactured by Abracon LLC, part of the ClearClock™ AX3 series. This surface mount crystal oscillator operates at 2.5V with enable/disable functionality, designed for applications requiring stable frequency generation with low voltage differential signaling output. The part is currently active in production with 974 units in stock. Substitute parts may be required due to packaging preferences, inventory availability, or specific supply chain requirements while maintaining identical electrical and mechanical performance.

Substiute Parts

AX3PBF2-100.0000

Abracon LLCIn Stock: 1009AX3PBF2-100.0000 Datasheet

Current PartRFQ

AX3PBF1-100.0000

Abracon LLCIn Stock: 1170AX3PBF1-100.0000 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The AX3PBF1-100.0000 qualifies as a parametric equivalent substitute based on the following critical parameters:

Electrical Parameters (Identical):

• Frequency: 100 MHz
• Output Type: LVPECL
• Supply Voltage: 2.5V
• Frequency Stability: ±25ppm
• Operating Temperature Range: -40°C ~ 85°C
• Current - Supply (Max): 50mA
• Current - Supply (Disable) (Max): 10µA
• Function: Enable/Disable

Mechanical Parameters (Identical):

• Package / Case: 6-SMD, No Lead
• Size / Dimension: 0.126" L x 0.098" W (3.20mm x 2.50mm)
• Height - Seated (Max): 0.043" (1.10mm)
• Mounting Type: Surface Mount

Difference:

• Packaging format: AX3PBF2-100.0000 supplied in standard packaging; AX3PBF1-100.0000 supplied in Strip packaging

Both parts belong to the same ClearClock™ AX3 series and maintain identical functional and physical specifications, differing only in supply packaging configuration.

Parameter Comparison

Engineering Selection Recommendations

Both AX3PBF2-100.0000 and AX3PBF1-100.0000 are active production parts from Abracon LLC with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements:

• AX3PBF2-100.0000: Use when standard packaging format is required for your supply chain or assembly process.
• AX3PBF1-100.0000: Use when strip packaging format is preferred or mandated by your procurement specifications.

Both parts maintain ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1), ensuring compatibility with standard surface mount assembly processes and environmental requirements. Current inventory levels support both options: 974 units for AX3PBF2-100.0000 and 1076 units for AX3PBF1-100.0000.

Frequently Asked Questions (FAQ)

Q: Can AX3PBF1-100.0000 be used as a direct replacement for AX3PBF2-100.0000 in PCB assembly?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (standard vs. strip). PCB assembly compatibility is not affected by this distinction.

Q: Are there any performance differences between these two part numbers?

A: No. Both parts deliver identical performance across all electrical parameters: 100 MHz frequency, LVPECL output, 2.5V supply, ±25ppm stability, and identical current consumption specifications.

Q: What does the packaging difference mean for my supply chain?

A: AX3PBF2-100.0000 comes in standard packaging, while AX3PBF1-100.0000 comes in strip packaging. Strip packaging typically offers cost advantages for high-volume automated assembly but may require different handling equipment. Standard packaging is suitable for manual or mixed-volume assembly processes.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (unlimited) moisture sensitivity rating. They are functionally equivalent for regulatory and environmental compliance purposes.

Q: Which part should I select for a new design?

A: Selection depends on your assembly process and supply chain preferences. If your facility uses strip-fed pick-and-place equipment, AX3PBF1-100.0000 may be more efficient. For standard assembly processes, AX3PBF2-100.0000 is appropriate. Both are active production parts with adequate inventory.