AX100695-S Equivalent & Substitute Parts

Part Overview

The AX100695-S is a 300-pair modular wiring block connector kit manufactured by Belden Inc., designed for structured cabling applications. This component is classified as obsolete, necessitating identification of active equivalent parts for ongoing procurement and system maintenance. The part functions as a pair modular wiring block connector with integrated legs for installation in telecommunications infrastructure.

Substiute Parts

AX100695-S

Belden Inc.In Stock: 1056AX100695-S Datasheet

Current PartRFQ

AX100693-S

BeldenIn Stock: 893AX100693-S Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AX100695-S is based on the following criteria:

The primary substitute, AX100693-S, maintains compatibility through shared functional classification as a pair modular wiring block connector with integrated legs. Both parts are manufactured by Belden and classified under the modular connectors category with bulk packaging. The substitution is valid based on:

• Identical product category and functional type
• Common manufacturer (Belden)
• Identical packaging format (Bulk)
• Matching REACH compliance status (REACH Unaffected)
• Equivalent electrical and mechanical interface design for modular wiring block applications

The key differentiator is pair count: AX100695-S provides 300-pair capacity, while AX100693-S provides 100-pair capacity. Selection between these parts depends on the specific pair count requirement of the installation.

Parameter Comparison

Engineering Selection Recommendations

The AX100693-S is the manufacturer-recommended substitute for the obsolete AX100695-S. Both parts maintain REACH compliance and share identical regulatory classification (REACH Unaffected). The active product status of AX100693-S ensures continued availability and support for new installations and replacements.

Selection between these parts is determined by pair count requirements. The 300-pair AX100695-S is suitable for large-scale telecommunications infrastructure, while the 100-pair AX100693-S addresses applications requiring lower pair density. Both parts are available in bulk packaging and maintain equivalent mechanical and electrical interface specifications for modular wiring block connector applications.

Frequently Asked Questions (FAQ)

Q: Can AX100693-S directly replace AX100695-S in all applications?

A: Direct replacement is possible only when the application pair count requirement is 100 pairs or less. The AX100693-S provides 100-pair capacity compared to the 300-pair capacity of AX100695-S. Verify the specific pair count requirement of your installation before substitution.

Q: What is the difference between these two part numbers?

A: Both parts are pair modular wiring block connectors manufactured by Belden with identical functional design and bulk packaging. The primary difference is pair count: AX100695-S provides 300-pair capacity, while AX100693-S provides 100-pair capacity.

Q: Why is AX100695-S listed as obsolete?

A: The AX100695-S has been discontinued by the manufacturer. The AX100693-S is the active equivalent part available for procurement.

Q: Are there any compliance differences between these parts?

A: No. Both parts maintain identical REACH compliance status (REACH Unaffected) and are classified under the same regulatory framework (ECCN EAR99).

Q: What packaging options are available?

A: Both parts are supplied in bulk packaging format.