AWP26-8241-T-R Equivalent & Substitute Parts

Part Overview

The AWP26-8241-T-R is a 26-position rectangular socket connector with IDC (Insulation Displacement Contact) termination and gold plating, manufactured by Assmann WSW Components. This connector is designed for ribbon cable applications with feed-through and strain relief features. The part is currently listed as obsolete, making identification of equivalent and substitute components essential for ongoing system support and procurement planning.

Key Parameters

Parameter	Value
Connector Type	Socket
Contact Type	Female Socket
Number of Positions	26
Pitch	0.100" (2.54mm)
Number of Rows	2
Row Spacing	0.100" (2.54mm)
Cable Termination	IDC
Wire Type	Ribbon Cable
Contact Finish	Gold
Mounting Type	Free Hanging (In-Line)
Features	Feed Through, Strain Relief
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution for the AWP26-8241-T-R is determined by strict equivalence across the following critical parameters:

26-position configuration with 2-row layout at 0.100" (2.54mm) pitch and row spacing
IDC ribbon cable termination method
Female socket contact type
Gold contact finish
Free hanging in-line mounting
Feed-through capability

Two substitute parts meet these criteria:

AWP 26-8240-T (Assmann WSW Components): Direct manufacturer equivalent with identical electrical and mechanical specifications. Primary difference is packaging format (tray versus original specification) and active product status.

CWR-210-26-0000 (CW Industries): Cross-manufacturer substitute with equivalent functional parameters. Maintains all critical electrical and mechanical characteristics including 26-position IDC socket configuration, gold plating, and ribbon cable compatibility. Classified as receptacle terminology but functionally equivalent as female socket contact.

Parameter Comparison

Parameter	AWP26-8241-T-R (Main)	AWP 26-8240-T (Substitute)	CWR-210-26-0000 (Substitute)
Manufacturer	Assmann WSW Components	Assmann WSW Components	CW Industries
Connector Type	Socket	Socket	Receptacle
Contact Type	Female Socket	Female Socket	Female Socket
Number of Positions	26	26	26
Pitch	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Rows	2	2	2
Row Spacing	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Cable Termination	IDC	IDC	IDC
Wire Type	Ribbon Cable	Ribbon Cable	Ribbon Cable
Contact Finish	Gold	Gold	Gold
Mounting Type	Free Hanging (In-Line)	Free Hanging (In-Line)	Free Hanging (In-Line)
Features	Feed Through, Strain Relief	Feed Through	Feed Through, Strain Relief
Product Status	Obsolete	Active	Active
RoHS Status	Not specified	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected
ECCN	EAR99	EAR99	EAR99

Engineering Selection Recommendations

AWP 26-8240-T is the primary substitute for direct replacement applications. This part maintains manufacturer continuity with Assmann WSW Components and carries active product status with ROHS3 compliance certification. The part is functionally identical to the main component across all critical electrical and mechanical parameters. Packaging format differs (tray versus original), which may affect procurement and handling procedures but does not impact electrical performance or mechanical compatibility.

CWR-210-26-0000 serves as a cross-manufacturer alternative when AWP 26-8240-T availability is constrained. This CW Industries connector provides equivalent functional performance with active product status and ROHS3 compliance. The part includes both feed-through and strain relief features, matching the original specification more closely than AWP 26-8240-T in this regard. Selection between these two substitutes should be based on supply chain availability, procurement lead times, and any existing qualification requirements for CW Industries components in the target application.

Frequently Asked Questions (FAQ)

Q: Can AWP 26-8240-T be used as a direct replacement for AWP26-8241-T-R?

A: Yes. Both parts share identical electrical and mechanical specifications including 26-position configuration, 0.100" pitch, IDC ribbon cable termination, and gold contact finish. The primary difference is packaging format (tray versus original specification) and product status (active versus obsolete).

Q: What is the functional difference between a socket and receptacle connector in this context?

A: In this product category, both terms refer to female contact connectors designed to accept male pins or contacts. The CWR-210-26-0000 uses receptacle terminology but provides equivalent female socket functionality for IDC ribbon cable termination.

Q: Are there compatibility concerns when substituting CWR-210-26-0000 for the original part?

A: No compatibility concerns exist for the specified electrical and mechanical parameters. Both parts maintain 26-position configuration, 0.100" pitch, IDC termination, and gold plating. The CW Industries part includes strain relief features matching the original specification.

Q: How does product status affect substitution decisions?

A: The original AWP26-8241-T-R is obsolete, making substitution necessary for new procurement. Both recommended substitutes carry active product status, ensuring ongoing availability and manufacturer support. Active status also indicates compliance with current regulatory requirements including ROHS3.

Q: What role does packaging format play in part selection?

A: Packaging format (tray, bulk, or other) affects procurement procedures, handling, and storage but does not impact electrical performance or mechanical compatibility. Selection should align with existing inventory management and assembly processes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message