AWLP-50/3.2-T-R Equivalent & Substitute Parts

Part Overview

The AWLP-50/3.2-T-R is a 50-position ribbon cable DIP header connector manufactured by Assmann WSW Components, designed for through-hole mounting applications. This connector features IDC (Insulation Displacement Contact) termination and is classified as obsolete. Due to its obsolete status, identifying equivalent and substitute parts is essential for ongoing system maintenance, repairs, and component sourcing for legacy equipment.

Substiute Parts

AWLP-50/3.2-T-R

Assmann WSW ComponentsIn Stock: 743AWLP-50/3.2-T-R Datasheet

Current PartRFQ

AWLP 50/3,2-T

Assmann WSW ComponentsIn Stock: 1145AWLP 50/3,2-T Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the AWLP-50/3.2-T-R is determined by strict equivalence across the following critical parameters:

• Connector type: Ribbon Cable, DIP Header
• Position count: 50 positions
• Cable pitch: 0.050" (1.27mm)
• Board-side pitch: 0.100" (2.54mm)
• Row configuration: 2 rows with 0.100" (2.54mm) spacing
• Mounting method: Through Hole
• Termination method: IDC
• Feed-through capability
• Tin contact finish
• Gray color
• All positions loaded

The substitute part AWLP 50/3,2-T meets all these parameters and is manufactured by the same supplier, ensuring mechanical and electrical compatibility.

Parameter Comparison

Engineering Selection Recommendations

The AWLP 50/3,2-T is the direct substitute for the AWLP-50/3.2-T-R. Both parts are manufactured by Assmann WSW Components and share identical electrical and mechanical specifications across all critical parameters. The substitute part is currently in active production status, whereas the original part is obsolete. The substitute part carries ROHS3 compliance certification, providing enhanced environmental and regulatory alignment for new designs and system updates. Both parts maintain REACH Unaffected status and identical MSL ratings. The substitute is available in Tray packaging and offers superior inventory availability for procurement purposes.

Frequently Asked Questions (FAQ)

Q: Are the AWLP-50/3.2-T-R and AWLP 50/3,2-T mechanically interchangeable?

A: Yes. Both connectors share identical mechanical specifications: 50 positions, 0.050" (1.27mm) cable pitch, 0.100" (2.54mm) board-side pitch, 2-row configuration with 0.100" (2.54mm) row spacing, through-hole mounting, and feed-through capability. They are direct mechanical equivalents.

Q: Are the electrical specifications identical between these parts?

A: Yes. Both parts feature IDC termination, tin contact finish, and identical contact configuration. They are direct electrical equivalents.

Q: What is the difference between the two part numbers?

A: The AWLP 50/3,2-T is the active production equivalent of the obsolete AWLP-50/3.2-T-R. The substitute part includes ROHS3 compliance and is available in Tray packaging. All functional specifications remain identical.

Q: Can I use the AWLP 50/3,2-T as a replacement in legacy equipment designed for the AWLP-50/3.2-T-R?

A: Yes. The parts are fully compatible. The substitute part meets all mechanical and electrical requirements of the original design.

Q: What packaging options are available for the substitute part?

A: The AWLP 50/3,2-T is supplied in Tray packaging.

Q: Are there any compliance differences between the original and substitute parts?

A: The substitute part (AWLP 50/3,2-T) carries ROHS3 compliance certification. Both parts maintain REACH Unaffected status and identical MSL ratings of 1 (Unlimited).