AWLP 34/3,2-G Equivalent & Substitute Parts

Part Overview

The AWLP 34/3,2-G is a 34-position ribbon cable DIP header connector manufactured by Assmann WSW Components. This through-hole mounted connector features IDC (Insulation Displacement Contact) termination and is designed for applications requiring reliable ribbon cable interconnection. The part is currently active in production with full inventory availability. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when procurement requirements necessitate alternative manufacturers.

Substiute Parts

AWLP 34/3,2-G

Assmann WSW ComponentsIn Stock: 857AWLP 34/3,2-G Datasheet

Current PartRFQ

7834-0000PR

3MIn Stock: 9897834-0000PR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AWLP 34/3,2-G is determined by strict equivalence across the following critical parameters:

• Connector type: Ribbon Cable, DIP Header
• Position count: 34 positions
• Cable pitch: 0.050" (1.27mm)
• Board-side pitch: 0.100" (2.54mm)
• Row configuration: 2 rows with 0.100" (2.54mm) spacing
• Mounting method: Through Hole
• Termination method: IDC
• Contact finish: Gold
• Color: Gray
• Feed-through capability: Required

The substitute part 7834-0000PR from 3M meets all these criteria and is classified as a manufacturer-recommended equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the AWLP 34/3,2-G and 7834-0000PR are active production parts with identical electrical and mechanical specifications. Both parts maintain ROHS3 compliance and carry MSL rating 1, indicating no moisture sensitivity constraints. The 3M 7834-0000PR is designated as the manufacturer-recommended substitute and is available in bulk packaging. Selection between these parts should be based on procurement availability, lead time requirements, and packaging format needs.

Frequently Asked Questions (FAQ)

Q: Can the 7834-0000PR directly replace the AWLP 34/3,2-G in existing designs?

A: Yes. Both connectors share identical pitch specifications (0.050" cable pitch, 0.100" board-side pitch), row configuration (2 rows, 0.100" spacing), mounting method (through hole), and termination method (IDC). The 34-position count and gold contact finish are identical across both parts.

Q: What is the difference in wire gauge specifications between these parts?

A: The AWLP 34/3,2-G does not specify wire gauge in the provided data. The 7834-0000PR supports 26 AWG stranded, 28 AWG solid or stranded, and 30 AWG solid wire configurations. Wire gauge compatibility should be verified against your specific ribbon cable assembly requirements.

Q: Are there packaging differences between these parts?

A: Yes. The AWLP 34/3,2-G is supplied in tray packaging, while the 7834-0000PR is supplied in bulk packaging. Packaging format may affect handling, storage, and ordering quantities.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the AWLP 34/3,2-G and 7834-0000PR are ROHS3 compliant, REACH unaffected, and carry identical MSL rating 1 (unlimited moisture sensitivity level). Both parts share the same ECCN (EAR99) and HTSUS classification.

Q: What determines substitution eligibility for this connector type?

A: Substitution eligibility is determined by matching connector type, position count, cable pitch, board-side pitch, row configuration, row spacing, mounting type, cable termination method, contact finish, and color. All these parameters must be identical for direct substitution.