AWLP-30/3.2-T-R Equivalent & Substitute Parts

Part Overview

The AWLP-30/3.2-T-R is a 30-position ribbon cable DIP header connector manufactured by Assmann WSW Components. This through-hole mounted connector features IDC (Insulation Displacement Contact) termination and is designed for applications requiring dual-row ribbon cable connectivity with 0.050" cable pitch and 0.100" board-side pitch spacing.

The AWLP-30/3.2-T-R is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or maintenance requirements for systems utilizing this connector type.

Substiute Parts

AWLP-30/3.2-T-R

Assmann WSW ComponentsIn Stock: 930AWLP-30/3.2-T-R Datasheet

Current PartRFQ

AWLP 30/3,2-T

Assmann WSW ComponentsIn Stock: 902AWLP 30/3,2-T Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AWLP-30/3.2-T-R is determined by strict equivalence across the following critical parameters:

• Connector Type: Ribbon Cable, DIP Header
• Number of Positions: 30
• Cable Pitch: 0.050" (1.27mm)
• Board-Side Pitch: 0.100" (2.54mm)
• Number of Rows: 2
• Row Spacing: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Cable Termination: IDC
• Contact Finish: Tin
• Color: Gray

The substitute part AWLP 30/3,2-T matches all critical electrical and mechanical parameters required for direct substitution. The primary distinction is product status and packaging configuration.

Parameter Comparison

Engineering Selection Recommendations

The AWLP 30/3,2-T is the direct substitute for the obsolete AWLP-30/3.2-T-R. Both parts are manufactured by Assmann WSW Components and share identical electrical and mechanical specifications across all critical parameters.

The AWLP 30/3,2-T offers the following advantages:

• Active product status ensures ongoing availability and manufacturer support
• ROHS3 compliance provides regulatory alignment with current environmental standards
• Tray packaging supports efficient inventory management and automated assembly processes
• Identical connector geometry, pitch specifications, and contact configuration ensure mechanical and electrical compatibility

Selection of the AWLP 30/3,2-T eliminates obsolescence risk while maintaining full functional equivalence with the original design specification.

Frequently Asked Questions (FAQ)

Q: Can the AWLP 30/3,2-T be used as a direct replacement for the AWLP-30/3.2-T-R?

A: Yes. Both connectors share identical specifications for connector type, position count, cable pitch, board-side pitch, row configuration, mounting type, cable termination method, contact finish, and color. The electrical and mechanical interfaces are fully compatible.

Q: What is the primary difference between these two parts?

A: The AWLP-30/3.2-T-R is classified as obsolete, while the AWLP 30/3,2-T is an active product. The substitute part includes ROHS3 compliance certification and is supplied in tray packaging rather than the unspecified packaging of the original part.

Q: Are there any compatibility concerns when substituting the AWLP 30/3,2-T for the AWLP-30/3.2-T-R?

A: No compatibility concerns exist. The substitute part maintains identical pitch specifications (0.050" cable pitch, 0.100" board-side pitch), row spacing, mounting configuration, and IDC termination method. PCB footprints and ribbon cable connectors are fully interchangeable.

Q: Does the packaging change from unspecified to tray affect component performance?

A: Packaging does not affect electrical or mechanical performance. Tray packaging provides improved handling, storage, and automated assembly compatibility compared to alternative packaging methods.

Q: Are both parts compliant with current regulatory standards?

A: The AWLP 30/3,2-T is ROHS3 compliant and REACH unaffected. Both parts carry identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications. The substitute part meets current environmental and export compliance requirements.