AWLP-10/3.2-T-R Equivalent & Substitute Parts

Part Overview

The AWLP-10/3.2-T-R is a 10-position ribbon cable DIP header connector manufactured by Assmann WSW Components, designed for through-hole mounting applications with IDC (Insulation Displacement Contact) termination. This connector features a gray color, feed-through design, and tin contact finish. The product is currently listed as obsolete, making identification of equivalent and substitute parts essential for ongoing system maintenance and component procurement.

Substiute Parts

AWLP-10/3.2-T-R

Assmann WSW ComponentsIn Stock: 939AWLP-10/3.2-T-R Datasheet

Current PartRFQ

AWLP 10/3,2-T

Assmann WSW ComponentsIn Stock: 1207AWLP 10/3,2-T Datasheet

DirectRFQ

7810-0000PR

3MIn Stock: 16947810-0000PR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AWLP-10/3.2-T-R is determined by strict alignment of the following critical parameters:

• Connector Type: Ribbon Cable, DIP Header
• Number of Positions: 10
• Cable Pitch: 0.050" (1.27mm)
• Board-Side Pitch: 0.100" (2.54mm)
• Number of Rows: 2
• Row Spacing: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Cable Termination: IDC
• Features: Feed Through
• Number of Positions Loaded: All
• Moisture Sensitivity Level: 1 (Unlimited)

Two substitute parts meet these criteria and are identified as direct equivalents or manufacturer-recommended alternatives.

Parameter Comparison

Engineering Selection Recommendations

The AWLP 10/3,2-T represents a direct equivalent from the same manufacturer with identical electrical and mechanical specifications. This part is currently in active production status and carries ROHS3 compliance certification, providing a straightforward replacement path for the obsolete AWLP-10/3.2-T-R.

The 7810-0000PR from 3M is a manufacturer-recommended alternative that maintains all critical dimensional and functional parameters. This part differs in contact finish material (gold versus tin) and wire gauge specifications (26 AWG stranded, 28 AWG solid or stranded, 30 AWG solid). Both substitute parts carry active product status and ROHS3 compliance, ensuring regulatory alignment with current manufacturing standards.

Frequently Asked Questions (FAQ)

Q: Can AWLP 10/3,2-T be used as a direct replacement for AWLP-10/3.2-T-R?

A: Yes. Both parts share identical connector type, position count, pitch specifications, mounting configuration, and IDC termination method. The primary difference is product status: AWLP 10/3,2-T is active production while AWLP-10/3.2-T-R is obsolete.

Q: What is the difference between the tin contact finish on AWLP-10/3.2-T-R and the gold contact finish on 7810-0000PR?

A: Contact finish material affects electrical conductivity and corrosion resistance characteristics. Both finishes are suitable for IDC ribbon cable connectors; selection depends on application-specific environmental and performance requirements.

Q: Are there packaging differences between the substitute parts?

A: Yes. AWLP-10/3.2-T-R packaging is not specified. AWLP 10/3,2-T is supplied in Tray packaging. 7810-0000PR is supplied in Bulk packaging. Packaging format may affect procurement quantities and handling procedures.

Q: Do the substitute parts support the same wire gauges?

A: AWLP-10/3.2-T-R and AWLP 10/3,2-T do not specify wire gauge. 7810-0000PR supports 26 AWG stranded, 28 AWG solid or stranded, and 30 AWG solid wire configurations, providing broader wire gauge compatibility.

Q: Are both substitute parts compliant with current regulatory standards?

A: Both AWLP 10/3,2-T and 7810-0000PR carry ROHS3 compliance and REACH Unaffected status, meeting current regulatory requirements for electronic component procurement.