AVS477M06F24B-F Equivalent & Substitute Parts

Part Overview

The AVS477M06F24B-F is a 470 µF, 6.3 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in surface mount radial can package. This component is rated for automotive applications with AEC-Q200 compliance and operates across -40°C to 85°C with a 2000-hour lifetime at 85°C. The part is discontinued at DiGi Electronics, necessitating identification of equivalent and substitute components for ongoing design support and production requirements.

Substiute Parts

AVS477M06F24B-F

Cornell Dubilier Electronics (CDE)In Stock: 768AVS477M06F24B-F Datasheet

Current PartRFQ

AHA477M16F24B-F

Cornell Dubilier Electronics (CDE)In Stock: 1102AHA477M16F24B-F Datasheet

UpgradeRFQ

EEE-0JA471P

Panasonic Electronic ComponentsIn Stock: 9209EEE-0JA471P Datasheet

DirectRFQ

EMVA6R3ADA471MHA0G

Chemi-ConIn Stock: 1227EMVA6R3ADA471MHA0G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the AVS477M06F24B-F is determined by strict adherence to the following electrical and mechanical parameters:

Critical Parameters for Direct Substitution:

• Capacitance: 470 µF (exact match required)
• Voltage Rating: 6.3 V (minimum requirement; higher voltage ratings are acceptable upgrades)
• Tolerance: ±20% (standard tolerance class)
• Package Type: Radial, Can - SMD (physical form factor)
• Physical Dimensions: 0.315" Dia (8.00mm) and 0.402" Height (10.20mm) maximum
• Surface Mount Land Size: 0.327" L × 0.327" W (8.30mm × 8.30mm)
• Polarization: Polar (electrolytic capacitor type)
• Mounting Type: Surface Mount

Acceptable Variation Parameters:

• Operating Temperature Range: May extend beyond -40°C to 85°C
• Lifetime @ Temperature: May exceed 2000 Hrs @ 85°C
• ESR (Equivalent Series Resistance): Variation acceptable if electrical performance requirements are met
• Ripple Current Ratings: Variation acceptable based on application requirements

Compliance Parameters:

• RoHS Status: ROHS3 Compliant or equivalent
• Moisture Sensitivity Level: 1 (Unlimited) or equivalent
• REACH Status: REACH Unaffected or equivalent

Parts are grouped as direct equivalents when all critical parameters match. Parts with higher voltage ratings (16 V vs. 6.3 V) are classified as upgrades and are suitable for applications where the circuit design permits higher voltage components.

Parameter Comparison

Engineering Selection Recommendations

AHA477M16F24B-F (Upgrade Substitute)

The AHA477M16F24B-F is an active product from Cornell Dubilier Electronics with identical physical dimensions and surface mount land size to the AVS477M06F24B-F. The 16 V voltage rating provides a 2.54× safety margin over the 6.3 V specification of the main part. This component maintains AEC-Q200 automotive compliance and ROHS3 certification. The extended operating temperature range (-55°C to 105°C) and higher temperature lifetime rating (2000 Hrs @ 105°C) exceed the original specification. This part is suitable for direct substitution in applications where the circuit design accommodates the higher voltage rating.

EEE-0JA471P (Direct Equivalent)

The EEE-0JA471P from Panasonic Electronic Components matches the AVS477M06F24B-F in capacitance, voltage rating, tolerance, package type, and physical dimensions. This part carries AEC-Q200 compliance and RoHS certification. However, the product status is listed as "Not For New Designs," indicating limited long-term availability. This component is suitable for replacement in existing designs where Panasonic supply chain is established.

EMVA6R3ADA471MHA0G (Similar Substitute)

The EMVA6R3ADA471MHA0G from Chemi-Con matches the AVS477M06F24B-F in all critical electrical parameters and physical dimensions. The maximum seated height is 0.394" (10.00mm), which is 0.008" lower than the 0.402" specification of the main part, remaining within acceptable PCB assembly tolerances. The product status is "Last Time Buy," indicating this is a transitional component. This part is suitable for applications where Chemi-Con supply is available and height tolerance is acceptable.

Selection Priority:

1. Primary Choice: AHA477M16F24B-F (active product status, extended performance specifications)
2. Secondary Choice: EEE-0JA471P (direct electrical equivalent, established supply)
3. Tertiary Choice: EMVA6R3ADA471MHA0G (direct electrical equivalent, height consideration required)

Frequently Asked Questions (FAQ)

Q: Can the AHA477M16F24B-F (16 V) be used in place of the AVS477M06F24B-F (6.3 V)?

A: Yes. The AHA477M16F24B-F is a direct mechanical and electrical substitute with a higher voltage rating. In circuit applications, a higher-rated voltage component operates safely at lower voltages. The 16 V rating provides additional design margin and reliability. Verify that the circuit design does not depend on the specific voltage rating of the original component.

Q: What is the difference between the EEE-0JA471P and the AVS477M06F24B-F?

A: Both components have identical capacitance (470 µF), voltage rating (6.3 V), tolerance (±20%), package type (Radial, Can - SMD), and physical dimensions. The primary difference is the manufacturer: EEE-0JA471P is from Panasonic, while AVS477M06F24B-F is from Cornell Dubilier Electronics. The EEE-0JA471P is marked "Not For New Designs," indicating it is in end-of-life status.

Q: Is the EMVA6R3ADA471MHA0G compatible with the AVS477M06F24B-F?

A: The EMVA6R3ADA471MHA0G is mechanically and electrically compatible with the AVS477M06F24B-F. The maximum seated height is 0.394" (10.00mm) compared to 0.402" (10.20mm) for the main part. This 0.008" difference is within standard PCB assembly tolerances and does not affect functionality. Surface mount land size and all electrical parameters are identical.

Q: Why is the AVS477M06F24B-F discontinued?

A: The AVS477M06F24B-F is discontinued at DiGi Electronics. Discontinuation typically occurs due to manufacturer end-of-life decisions, market consolidation, or transition to newer product lines. Alternative parts with identical or superior specifications are available from multiple manufacturers.

Q: What does "Not For New Designs" mean for the EEE-0JA471P?

A: "Not For New Designs" indicates that the manufacturer (Panasonic) is no longer recommending this part for new circuit designs. The component remains available for replacement and repair of existing products. For new designs, alternative active products such as the AHA477M16F24B-F are recommended.

Q: What does "Last Time Buy" mean for the EMVA6R3ADA471MHA0G?

A: "Last Time Buy" indicates that Chemi-Con has announced a final purchase window for this component before discontinuation. Existing inventory is available, but future availability is limited. This part is suitable for current production runs but should not be selected for long-term production programs.

Q: Are all substitute parts AEC-Q200 compliant?

A: The AVS477M06F24B-F, AHA477M16F24B-F, and EEE-0JA471P all carry AEC-Q200 compliance for automotive applications. The EMVA6R3ADA471MHA0G does not list AEC-Q200 compliance in the provided specifications. For automotive applications requiring AEC-Q200 certification, select from the first three parts.

Q: What is the difference in ESR between the main part and substitutes?

A: The AVS477M06F24B-F specifies 1.2 Ohm ESR @ 120 Hz. The AHA477M16F24B-F specifies 700 mOhm @ 120 Hz, which is lower and indicates improved performance. The EEE-0JA471P and EMVA6R3ADA471MHA0G do not provide ESR specifications in the available data. ESR differences do not prevent substitution but may affect ripple current handling and thermal performance in high-frequency applications.

Q: Can these parts be used interchangeably in production?

A: The AHA477M16F24B-F, EEE-0JA471P, and EMVA6R3ADA471MHA0G are mechanically and electrically compatible with the AVS477M06F24B-F for surface mount assembly. All parts share identical physical dimensions, surface mount land size, and mounting type. Substitution requires verification that the circuit design accommodates any differences in electrical specifications (voltage rating, ESR, ripple current) and that supply chain and compliance requirements are met.