AVM3215P3 Equivalent & Substitute Parts

Part Overview

The AVM3215P3 is a snap action SPDT switch manufactured by Panasonic Electric Works, designed for chassis mount applications with solder lug termination. This switch is rated for 10A at 250V AC and features a straight lever actuator with On-Mom switch function. The part is currently active in production with RoHS compliance and unlimited moisture sensitivity level (MSL 1).

Equivalent and substitute parts are identified based on matching circuit topology (SPDT), switch function (On-Mom), mounting type (Chassis Mount), and compatible electrical ratings within defined operational parameters.

Substiute Parts

AVM3215P3

Panasonic Electric WorksIn Stock: 817AVM3215P3 Datasheet

Current PartRFQ

111SM115-H58

Honeywell Sensing and Productivity SolutionsIn Stock: 798111SM115-H58 Datasheet

SimilarRFQ

1HM1

Honeywell Sensing and Productivity SolutionsIn Stock: 8311HM1 Datasheet

SimilarRFQ

DB1C-A1LB

ZF ElectronicsIn Stock: 22554DB1C-A1LB Datasheet

SimilarRFQ

DC1C-A1LB

ZF ElectronicsIn Stock: 670DC1C-A1LB Datasheet

SimilarRFQ

DC2C-A1LB

ZF ElectronicsIn Stock: 1055DC2C-A1LB Datasheet

SimilarRFQ

DC3C-A1LB

ZF ElectronicsIn Stock: 14413DC3C-A1LB Datasheet

SimilarRFQ

ZM50D10B01

Honeywell Sensing and Productivity SolutionsIn Stock: 1828ZM50D10B01 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the AVM3215P3 is based on the following criteria:

Primary Matching Parameters:

• Circuit configuration: SPDT (Single Pole Double Throw)
• Switch function: On-Mom (momentary operation)
• Mounting type: Chassis Mount
• Actuator type: Lever, Straight
• Termination style: Solder Lug

Electrical Compatibility Criteria: Substitute parts must operate within the voltage and current requirements of the application. The AVM3215P3 operates at 10A, 250V AC. Substitutes with lower current ratings (5A, 100mA) or lower voltage ratings (125V, 28V, 30V) are acceptable only if the application does not exceed those limits. Substitutes with higher ratings provide margin but remain functionally equivalent.

Mechanical Compatibility: All substitute parts maintain chassis mount configuration with lever actuators, ensuring mechanical interchangeability in standard switch mounting applications.

Compliance and Status: All listed substitutes are active products with RoHS compliance and MSL 1 rating, matching the environmental and regulatory requirements of the main part.

Parameter Comparison

Engineering Selection Recommendations

Direct Current Rating Match (10A AC): DC2C-A1LB is the only substitute with matching 10A AC current rating. This part is suitable for applications requiring the same current capacity as the AVM3215P3, though it operates at 125V AC versus the original 250V AC rating.

Reduced Current Rating Substitutes (5A AC): 111SM115-H58, DB1C-A1LB, DC1C-A1LB, and ZM50D10B01 are suitable for applications where circuit current does not exceed 5A AC. These parts maintain SPDT configuration, chassis mount design, and solder lug termination. 111SM115-H58 features Quick Connect termination instead of solder lug, requiring connector compatibility verification.

Low Current Substitute (100mA AC): DC3C-A1LB is suitable only for low-current applications not exceeding 100mA AC. This part is not recommended for general replacement of the AVM3215P3 in standard 10A applications.

DC-Only Application: 1HM1 is rated for 5A DC at 28V and includes hermetic sealing. This part is suitable only for DC-powered circuits and is not interchangeable with the AVM3215P3 in AC applications.

Compliance Status: All substitute parts maintain active product status and RoHS compliance. ZF Electronics substitutes carry ROHS3 certification, while Panasonic and Honeywell parts carry standard RoHS compliance. Both certifications are acceptable for equivalent substitution.

Frequently Asked Questions (FAQ)

Q: Can DC2C-A1LB replace AVM3215P3 in a 250V AC circuit? A: DC2C-A1LB is rated for 125V AC maximum. It cannot be used in circuits operating at 250V AC. Voltage rating must not be exceeded.

Q: What is the difference between solder lug and quick connect termination? A: Solder lug termination requires direct soldering to circuit board traces or wiring. Quick Connect termination uses a round connector interface. 111SM115-H58 uses quick connect and requires compatible connector hardware. Verify connector availability before substitution.

Q: Can I use DB1C-A1LB in place of AVM3215P3 if my circuit only draws 5A? A: Yes. DB1C-A1LB is rated for 5A AC at 125V and maintains SPDT configuration, chassis mount design, and solder lug termination. Verify that circuit voltage does not exceed 125V AC.

Q: Is 1HM1 suitable for AC applications? A: No. 1HM1 is rated for DC operation only at 28V DC. It is not suitable for AC circuits and cannot replace AVM3215P3 in AC applications.

Q: What does MSL 1 mean? A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life with no special moisture control requirements during storage or handling. All listed parts carry MSL 1 rating.

Q: Are ZF Electronics DC-series parts interchangeable with each other? A: DC1C-A1LB, DC2C-A1LB, and DC3C-A1LB share the same mounting and termination style but differ in current ratings (5A, 10A, and 100mA respectively). Selection depends on circuit current requirements. They are not interchangeable without verifying current compatibility.

Q: What is the difference between RoHS and ROHS3 compliance? A: Both certifications indicate restriction of hazardous substances. ROHS3 is the current EU directive version. Both are acceptable for equivalent substitution in applications requiring RoHS compliance.