Equivalent & Substitute Parts for AVM3205619

Part Overview

The AVM3205619 is a snap-action switch manufactured by Panasonic Electric Works, featuring SPDT (Single Pole Double Throw) circuitry with on-momentary function. This chassis-mounted switch is rated for 100mA at 125V AC and 30V DC, with a round pin plunger actuator and solder lug termination. The part is currently active in production with RoHS compliance and unlimited moisture sensitivity level (MSL 1). Alternative equivalent parts may be required due to supply chain considerations, inventory availability, or specific application requirements where substitute models meet identical electrical and mechanical specifications.

Substiute Parts

AVM3205619

Panasonic Electric WorksIn Stock: 807AVM3205619 Datasheet

Current PartRFQ

DB1C-A1AA

Hirose Electric Co LtdIn Stock: 919DB1C-A1AA Datasheet

SimilarRFQ

DC3C-A1AA

Hirose Electric Co LtdIn Stock: 1171DC3C-A1AA Datasheet

SimilarRFQ

ZM10B10A01

Honeywell Sensing and Productivity SolutionsIn Stock: 20728ZM10B10A01 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AVM3205619 are identified based on strict equivalence of the following critical parameters:

• Circuit configuration (SPDT)
• Switch function (On-Momentary)
• Current rating (100mA AC/DC)
• Voltage ratings (125V AC, 30V DC)
• Actuator type (Round pin plunger)
• Mounting type (Chassis mount)
• Termination style (Solder lug)
• RoHS compliance status

The substitute parts DB1C-A1AA and DC3C-A1AA, both manufactured by Hirose Electric Co Ltd, are listed as obsolete products. The ZM10B10A01, manufactured by Honeywell Sensing and Productivity Solutions, is an active product that maintains electrical equivalence across all primary switching parameters while operating within compatible mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

The AVM3205619 is the primary recommended selection as an active product with established supply availability (785 units in stock) and proven electrical life rating of 200,000 cycles.

The ZM10B10A01 from Honeywell is a viable active alternative that maintains full electrical equivalence across all switching parameters. This part offers an extended operating temperature range (-40°C to 120°C versus -25°C to 85°C) and equivalent mechanical life rating. Selection of this substitute should be based on specific application temperature requirements and supply chain availability (20,676 units in stock).

The DB1C-A1AA and DC3C-A1AA from Hirose are obsolete products. While they maintain electrical equivalence, their obsolete status and lack of detailed mechanical specifications make them unsuitable for new designs or long-term production applications. These parts should only be considered for legacy system maintenance where original part compatibility is mandatory.

Frequently Asked Questions (FAQ)

Q: Can the ZM10B10A01 directly replace the AVM3205619 in existing designs?

A: Yes. Both parts share identical electrical specifications (SPDT, 100mA, 125V AC/30V DC), actuator type (round pin plunger), mounting configuration (chassis mount), and termination style (solder lug). The ZM10B10A01 offers an extended temperature operating range, making it suitable for applications requiring operation below -25°C or above 85°C.

Q: Why are the Hirose parts (DB1C-A1AA and DC3C-A1AA) listed as substitutes if they are obsolete?

A: These parts are documented as historical equivalents based on their electrical and mechanical parameter alignment. Obsolete status indicates they are no longer in active production. They should not be selected for new applications but may be referenced for legacy system documentation or maintenance of existing equipment where original part sourcing is no longer possible.

Q: What are the key parameters that determine substitutability for this switch?

A: Substitutability is determined by: circuit configuration (SPDT), switch function (on-momentary), current rating (100mA AC/DC), voltage ratings (125V AC and 30V DC), actuator type (round pin plunger), mounting type (chassis mount), and termination style (solder lug). All listed substitutes meet these criteria.

Q: Are there differences in mechanical performance between the AVM3205619 and ZM10B10A01?

A: Yes. The AVM3205619 specifies 200,000 electrical life cycles, while the ZM10B10A01 specifies 10,000 electrical life cycles. Both maintain 10,000,000 mechanical life cycles. Operating force differs (150gf versus 60gf) and operating position varies (0.330" versus 0.449"). These mechanical differences do not affect electrical substitutability but should be evaluated for specific mechanical interface requirements.

Q: What compliance certifications apply to all listed parts?

A: All parts are RoHS compliant and carry MSL 1 (unlimited moisture sensitivity level) rating. All parts are classified under HTSUS code 8536.50.7000 and ECCN EAR99.