AUSB1-DMN-HSR2 USB-C Connector Equivalent & Substitute Parts

Part Overview

The AUSB1-DMN-HSR2 is an active USB-C (USB TYPE-C) plug connector manufactured by Assmann WSW Components. This surface mount, right-angle connector supports USB 3.2 Gen 2 (Superspeed + USB 3.1) protocol with 24 contact positions and is designed for high-speed data transfer applications. The connector features a 1.5A current rating, gold-plated contacts, and shielded construction with SUS301 shell material. The part is RoHS3 compliant, REACH unaffected, and carries MSL 1 (unlimited moisture sensitivity level) classification.

Identifying equivalent and substitute parts is necessary when the primary part becomes unavailable, when alternative sourcing is required for supply chain optimization, or when design flexibility permits selection from qualified alternatives that meet identical electrical and mechanical specifications.

Substiute Parts

AUSB1-DMN-HSR2

Assmann WSW ComponentsIn Stock: 968AUSB1-DMN-HSR2 Datasheet

Current PartRFQ

PLUG-USBC-241SMT-4BC2SS

GlobTek, Inc.In Stock: 5240PLUG-USBC-241SMT-4BC2SS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AUSB1-DMN-HSR2 are qualified based on strict parametric equivalence across the following critical dimensions:

Electrical Compatibility:

• Connector type must be USB-C (USB TYPE-C)
• Protocol specification must support USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + USB 3.1)
• Contact configuration must be 24 position
• Gender must be Plug

Mechanical Compatibility:

• Mounting type must be Surface Mount, Right Angle
• Mounting feature must be Horizontal
• Termination method must be Solder
• Shielding must be present (Shielded)

Material & Compliance:

• Contact finish must be Gold
• Material flammability rating must be UL94 V-0
• RoHS3 compliance is required
• REACH unaffected status is required
• MSL rating must be 1 (Unlimited)
• Packaging must be Tape & Reel (TR)

The PLUG-USBC-241SMT-4BC2SS manufactured by GlobTek, Inc. meets all mandatory parametric requirements for direct substitution with the AUSB1-DMN-HSR2.

Parameter Comparison

Engineering Selection Recommendations

Both the AUSB1-DMN-HSR2 and PLUG-USBC-241SMT-4BC2SS are active, RoHS3-compliant USB-C connectors with identical electrical protocol support (USB 3.2 Gen 2) and mechanical form factors. Both parts carry UL94 V-0 flammability ratings and MSL 1 (unlimited) moisture sensitivity classifications, confirming suitability for standard manufacturing and storage environments.

The PLUG-USBC-241SMT-4BC2SS provides additional engineering documentation through specified operating temperature range (-40°C ~ 85°C) and mating cycle rating (10000 cycles), which the AUSB1-DMN-HSR2 does not explicitly declare. The current rating specification differs between parts: the AUSB1-DMN-HSR2 is rated at 1.5A, while the PLUG-USBC-241SMT-4BC2SS supports 0.9A and 5A ratings. Applications requiring exactly 1.5A operation should confirm compatibility with the GlobTek part's dual-rating specification.

Shell material differs between the two connectors: the AUSB1-DMN-HSR2 uses SUS301 stainless steel, while the PLUG-USBC-241SMT-4BC2SS uses steel. Both materials provide shielding functionality and comply with specified flammability standards. Material selection should be evaluated based on application-specific environmental and corrosion requirements.

Both parts are available in Tape & Reel packaging and maintain REACH unaffected status. Selection between these parts is appropriate based on supply availability, lead time requirements, and application-specific environmental operating conditions.

Frequently Asked Questions (FAQ)

Q: Can the PLUG-USBC-241SMT-4BC2SS directly replace the AUSB1-DMN-HSR2 in existing designs?

A: Yes. Both connectors share identical electrical protocol support (USB 3.2 Gen 2), contact configuration (24 position), mounting type (surface mount, right angle), and termination method (solder). All critical mechanical and electrical parameters are equivalent. The parts are mechanically and electrically interchangeable for PCB assembly applications.

Q: What is the difference in current rating between these two connectors?

A: The AUSB1-DMN-HSR2 is rated at 1.5A. The PLUG-USBC-241SMT-4BC2SS supports both 0.9A and 5A ratings. Applications operating at 1.5A fall within the overlapping range of the GlobTek part's 5A maximum rating, confirming electrical compatibility. Designs requiring sustained 1.5A operation are supported by both connectors.

Q: Why do the shell materials differ between these connectors?

A: The AUSB1-DMN-HSR2 uses SUS301 stainless steel, while the PLUG-USBC-241SMT-4BC2SS uses steel. Both materials provide electromagnetic shielding and meet UL94 V-0 flammability requirements. Material selection depends on application-specific environmental conditions, corrosion resistance requirements, and mechanical durability specifications. Both materials are suitable for standard industrial and consumer electronics applications.

Q: Are both connectors RoHS3 compliant?

A: Yes. Both the AUSB1-DMN-HSR2 and PLUG-USBC-241SMT-4BC2SS are RoHS3 compliant and REACH unaffected. Both parts meet current environmental and hazardous substance restrictions for electronics manufacturing and are suitable for applications requiring regulatory compliance.

Q: What is the MSL rating for these connectors?

A: Both connectors carry MSL 1 (unlimited) moisture sensitivity level classification. This rating indicates the parts do not require special moisture control during storage, handling, or manufacturing. Standard warehouse storage conditions are appropriate for both components.

Q: Are these connectors available in Tape & Reel packaging?

A: Yes. Both the AUSB1-DMN-HSR2 and PLUG-USBC-241SMT-4BC2SS are supplied in Tape & Reel (TR) packaging, suitable for automated pick-and-place assembly equipment and high-volume production environments.

Q: What operating temperature range is specified for these connectors?

A: The AUSB1-DMN-HSR2 does not provide an explicit operating temperature specification. The PLUG-USBC-241SMT-4BC2SS specifies -40°C ~ 85°C operating temperature range. Applications requiring operation outside standard room temperature conditions should reference the GlobTek part's documented temperature range or contact the Assmann WSW manufacturer for AUSB1-DMN-HSR2 temperature specifications.

Q: How many mating cycles are these connectors rated for?

A: The AUSB1-DMN-HSR2 does not provide a mating cycle specification. The PLUG-USBC-241SMT-4BC2SS is rated for 10000 mating cycles. Applications requiring high-cycle connector durability specifications should reference the GlobTek part's documented rating or contact the Assmann WSW manufacturer for AUSB1-DMN-HSR2 mating cycle information.