ATSAML10E15A-MUT Equivalent & Substitute Parts

Part Overview

The ATSAML10E15A-MUT is an ARM Cortex-M23 SAM L10 microcontroller IC manufactured by Microchip Technology. This 32-bit single-core embedded processor operates at 32MHz with 32KB FLASH program memory, 8KB RAM, and 2KB EEPROM. The device is housed in a 32-VQFN (5x5) surface mount package with an exposed pad and is currently in active product status. Finding equivalent substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and maintain component availability across production cycles.

Substiute Parts

ATSAML10E15A-MUT

Microchip TechnologyIn Stock: 5210ATSAML10E15A-MUT Datasheet

Current PartRFQ

ATSAML11E15A-MUT

Microchip TechnologyIn Stock: 2551ATSAML11E15A-MUT Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The ATSAML10E15A-MUT has one parametric equivalent substitute: the ATSAML11E15A-MUT. Substitution eligibility is determined by the following critical parameters that must remain identical:

• Core Processor: ARM Cortex-M23
• Core Size: 32-Bit Single-Core
• Speed: 32MHz
• Program Memory Size: 32KB (32K x 8) FLASH
• RAM Size: 8K x 8
• EEPROM Size: 2K x 8
• Voltage Supply Range: 1.62V ~ 3.63V
• Data Converters: A/D 10x12b; D/A 1x10b
• Number of I/O: 25
• Connectivity: I2C, LINbus, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Operating Temperature: -40°C ~ 85°C (TA)
• Package / Case: 32-VQFN (5x5) Exposed Pad
• Mounting Type: Surface Mount

The ATSAML11E15A-MUT belongs to the SAM L11 series, which maintains full electrical and mechanical compatibility with the SAM L10 series for this specific part number configuration.

Parameter Comparison

Engineering Selection Recommendations

Both the ATSAML10E15A-MUT and ATSAML11E15A-MUT are active products from Microchip Technology with identical electrical specifications and mechanical packaging. Both devices are ROHS3 compliant and carry the same MSL rating of 3 (168 Hours), ensuring equivalent environmental and regulatory compliance. Selection between these parts may be based on supply chain availability, inventory levels, or design timeline requirements, as they are fully interchangeable from an electrical and mechanical standpoint.

Frequently Asked Questions (FAQ)

Q: Can the ATSAML11E15A-MUT be used as a direct replacement for the ATSAML10E15A-MUT?

A: Yes. The ATSAML11E15A-MUT is a parametric equivalent with identical electrical characteristics, memory configuration, I/O count, connectivity options, and package specifications. Both devices operate at 32MHz with 32KB FLASH, 8KB RAM, and 2KB EEPROM in a 32-VQFN (5x5) surface mount package.

Q: Are there any differences in pin configuration between these parts?

A: No. Both parts use the same 32-VQFN (5x5) package with exposed pad and maintain identical pin assignments for all electrical interfaces.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the ATSAML10E15A-MUT and ATSAML11E15A-MUT are ROHS3 compliant with MSL rating 3 (168 Hours), REACH unaffected status, and identical operating temperature ranges of -40°C to 85°C.

Q: What is the primary difference between the SAM L10 and SAM L11 series?

A: While both series share identical electrical and mechanical specifications for this part number configuration, they represent different product lines within Microchip's SAM L microcontroller family. Selection should be based on supply availability and project requirements.

Q: Are there any voltage or thermal considerations when substituting between these parts?

A: No. Both parts operate within the same voltage supply range (1.62V ~ 3.63V) and identical operating temperature range (-40°C ~ 85°C TA), requiring no design modifications for thermal or power management.