ATSAML10D16A-MU Equivalent & Substitute Parts

Part Overview

The ATSAML10D16A-MU is an ARM Cortex-M23 32-bit microcontroller from Microchip Technology's SAM L10 series, featuring 64KB Flash memory, 16KB RAM, and 2KB EEPROM in a 24-VQFN surface mount package. The device is actively produced and widely used in embedded applications requiring low-power operation with integrated connectivity interfaces. Identifying equivalent and substitute parts ensures design flexibility, supply chain continuity, and access to alternative inventory sources while maintaining functional compatibility.

Key Parameters

Parameter	Value
Core Processor	ARM Cortex-M23
Core Size	32-Bit Single-Core
Speed	32MHz
Program Memory Size	64KB (64K x 8) FLASH
RAM Size	16K x 8
EEPROM Size	2K x 8
Voltage Supply Range	1.62V ~ 3.63V
Package Type	24-VQFN (4x4) Exposed Pad
Mounting Type	Surface Mount
Operating Temperature	-40°C ~ 85°C

Substitute Part Grouping Explanation

The ATSAML11D16A-MU qualifies as a parametric equivalent to the ATSAML10D16A-MU based on the following critical matching parameters:

Identical core processor architecture (ARM Cortex-M23)
Matching core size (32-Bit Single-Core)
Identical operating frequency (32MHz)
Identical program memory capacity (64KB Flash)
Identical RAM capacity (16KB)
Identical EEPROM capacity (2KB)
Identical voltage supply range (1.62V ~ 3.63V)
Identical package format (24-VQFN with exposed pad)
Identical mounting type (Surface Mount)
Identical operating temperature range (-40°C ~ 85°C)
Matching connectivity interfaces (I2C, LINbus, SPI, UART/USART)
Matching peripheral set (Brown-out Detect/Reset, DMA, POR, PWM, WDT)
Identical I/O count (17 pins)
Identical data converter specifications (A/D 5x12b, D/A 1x10b)

The primary distinction between these devices lies in their series designation (SAM L10 versus SAM L11) and associated regulatory classifications (ECCN and HTSUS codes), which reflect internal architectural enhancements rather than functional parameter changes relevant to component substitution.

Parameter Comparison

Parameter	ATSAML10D16A-MU	ATSAML11D16A-MU
Manufacturer	Microchip Technology	Microchip Technology
Core Processor	ARM Cortex-M23	ARM Cortex-M23
Core Size	32-Bit Single-Core	32-Bit Single-Core
Speed	32MHz	32MHz
Program Memory	64KB FLASH	64KB FLASH
RAM	16K x 8	16K x 8
EEPROM	2K x 8	2K x 8
Voltage Supply	1.62V ~ 3.63V	1.62V ~ 3.63V
Connectivity	I2C, LINbus, SPI, UART/USART	I2C, LINbus, SPI, UART/USART
Peripherals	Brown-out Detect/Reset, DMA, POR, PWM, WDT	Brown-out Detect/Reset, DMA, POR, PWM, WDT
Number of I/O	17	17
Data Converters	A/D 5x12b; D/A 1x10b	A/D 5x12b; D/A 1x10b
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C
Package Type	24-VQFN (4x4) Exposed Pad	24-VQFN (4x4) Exposed Pad
Mounting Type	Surface Mount	Surface Mount
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	3 (168 Hours)	3 (168 Hours)
REACH Status	REACH Unaffected	REACH Unaffected
Product Status	Active	Active

Engineering Selection Recommendations

Both the ATSAML10D16A-MU and ATSAML11D16A-MU maintain Active product status with full manufacturing support. Selection between these devices should be based on:

Supply chain availability and lead times
Inventory levels at authorized distributors
Project-specific regulatory or export requirements (ECCN/HTSUS classifications)
Existing design documentation and qualification history
Cost considerations at procurement time

Both devices carry identical RoHS3 compliance and REACH unaffected status, ensuring equivalent environmental and regulatory standing. The MSL rating of 3 (168 Hours) applies uniformly to both parts, requiring identical moisture control during storage and assembly.

Frequently Asked Questions (FAQ)

Q: Can ATSAML11D16A-MU be used as a direct replacement for ATSAML10D16A-MU in existing designs?

A: Yes. All functional parameters, memory configurations, electrical specifications, package dimensions, and pin assignments are identical. No design modifications are required for substitution.

Q: Are there differences in firmware compatibility between these two microcontrollers?

A: Firmware compatibility is determined by matching core processor architecture, memory capacity, and peripheral configuration. Since all these parameters are identical, firmware developed for one device operates on the other without modification.

Q: What is the significance of the different series designations (SAM L10 versus SAM L11)?

A: The series designation reflects internal architectural enhancements and regulatory classifications. From a component substitution perspective, these differences do not affect functional equivalence when all electrical and mechanical parameters match.

Q: Are the pin configurations identical between these parts?

A: Yes. Both devices use the 24-VQFN (4x4) package with exposed pad. Pin count, pin assignment, and PCB footprint requirements are identical.

Q: What moisture sensitivity precautions apply to both parts?

A: Both devices carry MSL rating 3 (168 Hours), requiring storage in controlled humidity environments and baking procedures before reflow soldering if moisture absorption limits are exceeded.

Q: Can these parts be mixed in the same production batch?

A: Yes, provided the design accommodates either part number and procurement documentation reflects the approved substitution. Verify with your quality and supply chain management procedures.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message