ATSAMC20J18A-ANT Equivalent & Substitute Parts

Part Overview

The ATSAMC20J18A-ANT is an ARM Cortex-M0+ based 32-bit microcontroller from Microchip Technology's SAM C20 series. This device integrates 256KB of FLASH program memory, 32KB of RAM, and 52 I/O pins in a 64-TQFP package. The microcontroller operates across a wide supply voltage range of 2.7V to 5.5V and supports multiple communication interfaces including I2C, LINbus, SPI, and UART/USART. With an active product status and ROHS3 compliance, this component remains in production. Identifying equivalent and substitute parts is essential for supply chain continuity, design flexibility, and procurement optimization.

Key Parameters

Parameter	Value
Manufacturer Part Number	ATSAMC20J18A-ANT
Manufacturer	Microchip Technology
Series	SAM C20
Core Processor	ARM Cortex-M0+
Core Size	32-Bit Single-Core
Speed	48MHz
Program Memory Size	256KB (256K x 8)
RAM Size	32K x 8
Number of I/O	52
Voltage Supply (Vcc/Vdd)	2.7V ~ 5.5V
Data Converters	A/D 12x12b
Connectivity	I2C, LINbus, SPI, UART/USART
Peripherals	Brown-out Detect/Reset, DMA, POR, WDT
Package / Case	64-TQFP (10x10)
Mounting Type	Surface Mount
Operating Temperature	-40°C ~ 105°C (TA)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Product Status	Active

Substitute Part Grouping Explanation

Substitution eligibility for the ATSAMC20J18A-ANT is determined by strict equivalence across core electrical and mechanical parameters. The following criteria define valid substitutes:

Core processor architecture must be ARM Cortex-M0+. Core size must remain 32-Bit Single-Core. Operating frequency must be 48MHz. Program memory capacity must be 256KB FLASH. RAM capacity must be 32KB. I/O pin count must be 52. Supply voltage range must be 2.7V to 5.5V. Data converter specification must be A/D 12x12b. Connectivity interfaces must include I2C, LINbus, SPI, and UART/USART. Peripheral set must include Brown-out Detect/Reset, DMA, POR, and WDT. Package type must be 64-TQFP (10x10). Mounting type must be Surface Mount. Operating temperature range must be -40°C to 105°C. RoHS compliance status must be ROHS3 Compliant. Moisture sensitivity level must be MSL 3 (168 Hours).

The only allowable variation is in packaging format (Cut Tape versus Tape & Reel), which does not affect electrical or functional performance.

Parameter Comparison

Parameter	ATSAMC20J18A-ANT (Main Part)	ATSAMC20J18A-ANTS2 (Substitute)
Manufacturer Part Number	ATSAMC20J18A-ANT	ATSAMC20J18A-ANTS2
Manufacturer	Microchip Technology	Microchip Technology
Series	SAM C20	SAM C20
Core Processor	ARM Cortex-M0+	ARM Cortex-M0+
Core Size	32-Bit Single-Core	32-Bit Single-Core
Speed	48MHz	48MHz
Program Memory Size	256KB (256K x 8)	256KB (256K x 8)
RAM Size	32K x 8	32K x 8
Number of I/O	52	52
Voltage Supply (Vcc/Vdd)	2.7V ~ 5.5V	2.7V ~ 5.5V
Data Converters	A/D 12x12b	A/D 12x12b
Connectivity	I2C, LINbus, SPI, UART/USART	I2C, LINbus, SPI, UART/USART
Peripherals	Brown-out Detect/Reset, DMA, POR, WDT	Brown-out Detect/Reset, DMA, POR, WDT
Package / Case	64-TQFP (10x10)	64-TQFP (10x10)
Mounting Type	Surface Mount	Surface Mount
Operating Temperature	-40°C ~ 105°C (TA)	-40°C ~ 105°C (TA)
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	3 (168 Hours)	3 (168 Hours)
Packaging Format	Cut Tape (CT) & Digi-Reel	Tape & Reel (TR)
Product Status	Active	Active

Engineering Selection Recommendations

Both the ATSAMC20J18A-ANT and ATSAMC20J18A-ANTS2 are electrically and functionally identical. Selection between these parts is based on procurement and supply chain requirements rather than technical performance.

The ATSAMC20J18A-ANT is supplied in Cut Tape (CT) & Digi-Reel format, suitable for lower-volume applications and manual assembly processes. The ATSAMC20J18A-ANTS2 is supplied in Tape & Reel (TR) format, optimized for high-volume automated pick-and-place assembly operations.

Both parts maintain Active product status from Microchip Technology, ensuring continued availability and support. Both comply with ROHS3 regulations and carry identical MSL 3 moisture sensitivity ratings. Selection should be based on assembly methodology, production volume, and inventory management practices.

Frequently Asked Questions (FAQ)

Q: Are ATSAMC20J18A-ANT and ATSAMC20J18A-ANTS2 electrically interchangeable?

A: Yes. Both parts are electrically and functionally identical. They contain the same ARM Cortex-M0+ processor, 256KB FLASH memory, 32KB RAM, 52 I/O pins, and identical peripheral sets. The only difference is packaging format.

Q: What is the difference between Cut Tape and Tape & Reel packaging?

A: Cut Tape (CT) & Digi-Reel format is supplied on individual tape segments, suitable for manual component handling and lower-volume assembly. Tape & Reel (TR) format is supplied on continuous reels, optimized for automated pick-and-place machinery in high-volume manufacturing environments.

Q: Can I use ATSAMC20J18A-ANTS2 in place of ATSAMC20J18A-ANT on a PCB?

A: Yes. Both parts use identical 64-TQFP (10x10) Surface Mount packages with the same pinout, footprint, and electrical characteristics. PCB design, layout, and assembly processes require no modification.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical ROHS3 compliance status, REACH unaffected designation, and MSL 3 (168 Hours) moisture sensitivity ratings. Regulatory and environmental compliance is equivalent.

Q: Which part should I select for my application?

A: Selection depends on your manufacturing process. For manual assembly or prototyping, use ATSAMC20J18A-ANT (Cut Tape). For automated high-volume production, use ATSAMC20J18A-ANTS2 (Tape & Reel). Both are functionally identical and will perform identically in your circuit.

Q: Are both parts currently in production?

A: Yes. Both ATSAMC20J18A-ANT and ATSAMC20J18A-ANTS2 maintain Active product status from Microchip Technology, ensuring continued availability and technical support.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message