ATSAM3S1AA-MU Equivalent & Substitute Parts

Part Overview

The ATSAM3S1AA-MU is an ARM Cortex-M3 based 32-bit microcontroller from Microchip Technology's SAM3S series, featuring 64KB Flash memory and 16KB RAM in a 48-QFN package. This device is classified as obsolete, making identification of compatible alternatives essential for ongoing system support and new design implementations. The substitute part ATSAM3S1AB-MU provides functional equivalence while maintaining active product status.

Key Parameters

Parameter	Value
Core Processor	ARM Cortex-M3
Core Size	32-Bit Single-Core
Speed	64MHz
Program Memory Size	64KB (64K x 8) FLASH
RAM Size	16K x 8
Voltage Supply Range	1.62V ~ 3.6V
Number of I/O	34
Mounting Type	Surface Mount
Package	48-VFQFN Exposed Pad (7x7)
Operating Temperature	-40°C ~ 85°C
Series	SAM3S

Substitute Part Grouping Explanation

The ATSAM3S1AB-MU qualifies as a direct substitute for the ATSAM3S1AA-MU based on the following criteria:

Matching Electrical Parameters:

Identical core processor architecture (ARM Cortex-M3)
Identical core size (32-Bit Single-Core)
Identical operating frequency (64MHz)
Identical program memory capacity (64KB Flash)
Identical RAM capacity (16KB)
Identical voltage supply range (1.62V ~ 3.6V)
Identical I/O count (34 pins)
Identical data converter specifications (A/D 8x10/12b)
Identical peripheral set (Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT)
Identical connectivity interfaces (I2C, MMC, SPI, SSC, UART/USART, USB)

Matching Mechanical Parameters:

Identical mounting type (Surface Mount)
Identical package designation (48-VFQFN Exposed Pad)
Identical package dimensions (7x7)

Compliance Alignment:

Both devices maintain ROHS3 compliance
Both devices are REACH unaffected
Both devices share identical MSL rating (3, 168 Hours)

Parameter Comparison

Parameter	ATSAM3S1AA-MU	ATSAM3S1AB-MU	Match
Manufacturer	Microchip Technology	Microchip Technology	Yes
Series	SAM3S	SAM3S	Yes
Core Processor	ARM Cortex-M3	ARM Cortex-M3	Yes
Core Size	32-Bit Single-Core	32-Bit Single-Core	Yes
Speed	64MHz	64MHz	Yes
Program Memory	64KB FLASH	64KB FLASH	Yes
RAM Size	16K x 8	16K x 8	Yes
Voltage Supply	1.62V ~ 3.6V	1.62V ~ 3.6V	Yes
I/O Count	34	34	Yes
Data Converters	A/D 8x10/12b	A/D 8x10/12b	Yes
Connectivity	I2C, MMC, SPI, SSC, UART/USART, USB	I2C, MMC, SPI, SSC, UART/USART, USB	Yes
Peripherals	Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT	Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT	Yes
Mounting Type	Surface Mount	Surface Mount	Yes
Package	48-VFQFN Exposed Pad (7x7)	48-VFQFN Exposed Pad (7x7)	Yes
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	Yes
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	Yes
MSL Rating	3 (168 Hours)	3 (168 Hours)	Yes
REACH Status	REACH Unaffected	REACH Unaffected	Yes
Product Status	Obsolete	Active	Different
Packaging Type	Not specified	Tray	Different

Engineering Selection Recommendations

The ATSAM3S1AB-MU is a direct functional and pin-compatible substitute for the ATSAM3S1AA-MU. Selection between these parts should be based on the following factors:

Product Status Consideration: The ATSAM3S1AA-MU carries obsolete status, indicating end-of-life classification. The ATSAM3S1AB-MU maintains active product status, ensuring continued availability and manufacturer support for new designs and production requirements.

Compliance and Certification: Both devices maintain identical compliance certifications (ROHS3, REACH unaffected) and moisture sensitivity levels, confirming equivalent environmental and regulatory standing.

Packaging and Logistics: The ATSAM3S1AB-MU is supplied in Tray packaging, which may differ from the original part's packaging configuration. Verify packaging requirements for your specific supply chain and assembly processes.

Electrical and Mechanical Equivalence: Complete parameter alignment across all electrical specifications, peripheral sets, and mechanical dimensions confirms direct substitutability without design modification.

Frequently Asked Questions (FAQ)

Q: Can ATSAM3S1AB-MU be used as a direct replacement for ATSAM3S1AA-MU without PCB modifications?

A: Yes. Both devices share identical pin counts (34 I/O), package type (48-VFQFN Exposed Pad), and package dimensions (7x7). No PCB layout changes are required for mechanical or electrical compatibility.

Q: Are the electrical specifications identical between these two parts?

A: Yes. Both devices feature identical core processor (ARM Cortex-M3), clock speed (64MHz), memory configuration (64KB Flash, 16KB RAM), voltage supply range (1.62V ~ 3.6V), and peripheral sets. No firmware or hardware modifications are necessary.

Q: What is the significance of the product status difference?

A: The ATSAM3S1AA-MU is classified as obsolete, meaning Microchip Technology has discontinued production and support. The ATSAM3S1AB-MU maintains active status, ensuring ongoing availability, technical support, and compliance with current manufacturing standards.

Q: Are there any differences in compliance or environmental ratings?

A: No. Both devices maintain ROHS3 compliance, REACH unaffected status, and identical MSL ratings (3, 168 Hours). Environmental and regulatory requirements are equivalent.

Q: Does packaging type affect compatibility?

A: Packaging type (Tray for ATSAM3S1AB-MU) affects supply chain logistics and handling procedures but does not impact electrical or mechanical compatibility. Verify that your assembly process accommodates the supplied packaging format.

Q: Can firmware developed for ATSAM3S1AA-MU run on ATSAM3S1AB-MU without modification?

A: Yes. Identical processor architecture, memory configuration, and peripheral sets ensure complete software compatibility. No firmware changes are required.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message