AT25F512B-SSH-T Equivalent & Substitute Parts

Part Overview

The AT25F512B-SSH-T is a 512Kbit SPI FLASH memory IC manufactured by Microchip Technology, packaged in 8-SOIC form factor. This device operates at 70 MHz clock frequency with a supply voltage range of 2.7V to 3.6V and is rated for industrial temperature range (-40°C to 85°C). The product is currently classified as obsolete, making equivalent and substitute parts necessary for ongoing system support and new design implementations where this specific part is no longer available through standard distribution channels.

Key Parameters

Parameter	Value
Memory Size	512Kbit
Memory Organization	64K x 8
Memory Interface	SPI
Clock Frequency	70 MHz
Voltage Supply Range	2.7V ~ 3.6V
Operating Temperature	-40°C ~ 85°C
Package / Case	8-SOIC (0.154", 3.90mm Width)
Write Cycle Time - Word	15µs
Write Cycle Time - Page	5ms
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution for the AT25F512B-SSH-T is determined by strict alignment of the following core parameters:

Memory capacity: 512Kbit (64K x 8 organization)
Interface protocol: SPI
Package type: 8-SOIC with identical physical dimensions
Supply voltage compatibility: 2.7V ~ 3.6V range
RoHS3 compliance status

The identified substitute parts maintain these critical parameters while operating within acceptable performance boundaries for SPI FLASH memory applications. Differences in clock frequency, write cycle times, and operating temperature ranges are secondary considerations that do not prevent functional substitution when the primary electrical and mechanical parameters align.

Parameter Comparison

Parameter	AT25F512B-SSH-T	SST25VF512A-33-4C-SAE	W25X05CLSNIG
Manufacturer	Microchip Technology	Microchip Technology	Winbond Electronics
Memory Size	512Kbit	512Kbit	512Kbit
Memory Organization	64K x 8	64K x 8	64K x 8
Memory Interface	SPI	SPI	SPI
Clock Frequency	70 MHz	33 MHz	104 MHz
Voltage Supply Range	2.7V ~ 3.6V	2.7V ~ 3.6V	2.3V ~ 3.6V
Operating Temperature	-40°C ~ 85°C	0°C ~ 70°C	-40°C ~ 85°C
Package / Case	8-SOIC (0.154", 3.90mm Width)	8-SOIC (0.154", 3.90mm Width)	8-SOIC (0.154", 3.90mm Width)
Write Cycle Time - Word	15µs	20µs	800µs
Write Cycle Time - Page	5ms	Not specified	Not specified
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Obsolete	Active	Active

Engineering Selection Recommendations

SST25VF512A-33-4C-SAE is the manufacturer-recommended substitute from Microchip Technology. This part maintains identical memory capacity, organization, and SPI interface specifications. The device carries active product status with verified programmability through DiGi-Electronics. RoHS3 compliance is confirmed. The primary trade-off is reduced clock frequency (33 MHz versus 70 MHz) and narrower operating temperature range (0°C to 70°C versus -40°C to 85°C). This substitute is suitable for applications where the lower clock frequency does not impact system performance and operating temperature requirements fall within the specified range.

W25X05CLSNIG from Winbond Electronics provides an alternative substitute with higher clock frequency capability (104 MHz) and extended low-temperature operating range (-40°C to 85°C). This part maintains the 512Kbit capacity and SPI interface in identical 8-SOIC packaging. RoHS3 compliance is confirmed. The extended supply voltage range (2.3V to 3.6V) provides additional design flexibility. However, write cycle time for word operations is significantly longer (800µs versus 15µs), which may impact applications requiring frequent write operations. This substitute is optimal for applications prioritizing high-speed read operations and wide temperature range support.

Both substitute parts are currently in active production with substantial inventory availability, ensuring long-term supply chain reliability compared to the obsolete AT25F512B-SSH-T.

Frequently Asked Questions (FAQ)

Q: Can SST25VF512A-33-4C-SAE be used as a direct replacement in all applications?

A: SST25VF512A-33-4C-SAE maintains electrical and mechanical compatibility with AT25F512B-SSH-T for SPI FLASH memory applications. However, the reduced clock frequency (33 MHz) and narrower operating temperature range (0°C to 70°C) must be verified against your specific application requirements. If your system operates below 0°C or above 70°C, or requires 70 MHz clock speeds, this substitute may not be suitable.

Q: What are the advantages of W25X05CLSNIG over SST25VF512A-33-4C-SAE?

A: W25X05CLSNIG offers higher clock frequency (104 MHz), wider operating temperature range (-40°C to 85°C matching the original part), and extended supply voltage range (2.3V to 3.6V). The primary disadvantage is significantly longer write cycle time (800µs), which may impact applications requiring frequent write operations.

Q: Are all substitute parts available in the same packaging?

A: Yes. All substitute parts are packaged in 8-SOIC (0.154", 3.90mm Width) form factor, ensuring mechanical compatibility with existing PCB layouts and socket designs.

Q: Do substitute parts maintain RoHS3 compliance?

A: Yes. Both SST25VF512A-33-4C-SAE and W25X05CLSNIG are RoHS3 compliant, matching the compliance status of AT25F512B-SSH-T.

Q: Which substitute should I select for industrial temperature applications?

A: For applications requiring the full industrial temperature range (-40°C to 85°C), W25X05CLSNIG is the appropriate choice. SST25VF512A-33-4C-SAE is limited to 0°C to 70°C operating range.

Q: How do write cycle times affect system performance?

A: Write cycle time determines the duration required to complete a single word or page write operation. AT25F512B-SSH-T requires 15µs per word and 5ms per page. SST25VF512A-33-4C-SAE requires 20µs per word. W25X05CLSNIG requires 800µs per word. Applications performing frequent write operations should account for these differences in timing calculations.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message