AT25DF641A-MH-T Equivalent & Substitute Parts

Part Overview

The AT25DF641A-MH-T is a 64Mbit Serial Peripheral Interface (SPI) Flash memory IC manufactured by Renesas Electronics Corporation. This non-volatile memory device operates at 100 MHz and is packaged in an 8-UDFN (5x6) surface mount configuration with exposed pad. The device is currently in active production status with 812 units in stock inventory.

Substitute parts are identified when equivalent memory capacity, interface protocol, voltage specifications, and operating temperature range align with the original component, enabling direct functional replacement in applications where package and pinout compatibility can be accommodated.

Key Parameters

Parameter	Value
Memory Size	64Mbit
Memory Type	Non-Volatile FLASH
Memory Interface	SPI
Clock Frequency	100 MHz
Voltage Supply Range	2.7V ~ 3.6V
Operating Temperature	-40°C ~ 85°C
Package Type	8-UDFN Exposed Pad (5x6)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	3 (168 Hours)

Substitute Part Grouping Explanation

Substitution eligibility for the AT25DF641A-MH-T is determined by the following critical parameters:

Memory Capacity: 64Mbit (8M x 8 organization or equivalent)
Memory Interface: SPI protocol support (standard or extended modes acceptable)
Voltage Supply Range: 2.7V ~ 3.6V compatibility
Operating Temperature Range: -40°C ~ 85°C minimum coverage
RoHS Compliance: ROHS3 Compliant status
Moisture Sensitivity Level: MSL 3 or better
Package Compatibility: Surface mount with pin-compatible or adapter-compatible footprint

The W25Q64JVZPIQ meets these substitution criteria through equivalent memory capacity, overlapping voltage specifications, matching temperature range, and identical compliance certifications. Package differences (8-WSON vs. 8-UDFN) require mechanical evaluation for board-level integration.

Parameter Comparison

Parameter	AT25DF641A-MH-T	W25Q64JVZPIQ	Match Status
Memory Size	64Mbit	64Mbit	Equivalent
Memory Type	Non-Volatile FLASH	Non-Volatile FLASH - NOR	Compatible
Memory Interface	SPI	SPI - Quad I/O	Compatible
Clock Frequency	100 MHz	133 MHz	Substitute Exceeds
Voltage Supply Range	2.7V ~ 3.6V	2.7V ~ 3.6V	Equivalent
Operating Temperature	-40°C ~ 85°C (TC)	-40°C ~ 85°C (TA)	Equivalent
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	Equivalent
Moisture Sensitivity Level	3 (168 Hours)	3 (168 Hours)	Equivalent
Package Type	8-UDFN Exposed Pad (5x6)	8-WSON Exposed Pad (6x5)	Different

Engineering Selection Recommendations

The W25Q64JVZPIQ qualifies as a functional substitute for the AT25DF641A-MH-T based on the following engineering criteria:

Both devices maintain identical 64Mbit memory capacity and SPI interface protocol
Voltage supply specifications are fully compatible across the 2.7V to 3.6V range
Operating temperature ranges are equivalent at -40°C to 85°C
Both components hold active product status with ROHS3 compliance and MSL 3 certification
The substitute device operates at 133 MHz, exceeding the original 100 MHz specification, providing performance headroom
Write cycle time for the substitute (3ms page write) differs from the original (6ms page write), representing improved performance characteristics

Package differences between 8-UDFN (5x6) and 8-WSON (6x5) require mechanical and electrical verification at the board design level. Pin assignment compatibility must be confirmed through datasheet cross-reference before implementation.

Frequently Asked Questions (FAQ)

Q: Can the W25Q64JVZPIQ directly replace the AT25DF641A-MH-T without PCB modifications?

A: Direct replacement depends on PCB footprint design. The 8-UDFN and 8-WSON packages have different dimensions and pin layouts. If the original design uses a 8-UDFN footprint, the substitute requires either a compatible footprint redesign or an adapter solution. Pin-to-pin compatibility must be verified against both datasheets.

Q: Are the SPI interface protocols fully compatible between these devices?

A: Both devices support standard SPI protocol. The W25Q64JVZPIQ additionally supports Quad I/O mode, which is a superset of standard SPI functionality. Existing firmware written for standard SPI operation on the AT25DF641A-MH-T will function on the W25Q64JVZPIQ without modification.

Q: What is the significance of the different clock frequencies (100 MHz vs. 133 MHz)?

A: The substitute device operates at a higher maximum clock frequency. This does not create incompatibility; systems designed for 100 MHz operation will function correctly at that speed on the 133 MHz device. The higher frequency capability provides design flexibility for future performance optimization.

Q: Do both devices meet the same compliance and environmental standards?

A: Yes. Both the AT25DF641A-MH-T and W25Q64JVZPIQ are ROHS3 compliant, REACH unaffected, and carry MSL 3 moisture sensitivity ratings with 168-hour storage specifications. Environmental and regulatory requirements are equivalent.

Q: What is the difference between the temperature specifications (TC vs. TA)?

A: TC indicates case temperature measurement, while TA indicates ambient temperature measurement. Both specifications define the same operating range of -40°C to 85°C. The measurement methodology difference does not affect functional compatibility.

Q: How does the write cycle time difference affect system performance?

A: The AT25DF641A-MH-T specifies 6ms page write time, while the W25Q64JVZPIQ specifies 3ms. The substitute device provides faster write operations, which improves overall system throughput. Firmware designed for the original 6ms specification will operate correctly with the faster substitute without modification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message