AT1206DRD07590RL Equivalent & Substitute Parts

Part Overview

The AT1206DRD07590RL is a 590 Ohms ±0.5% thin film chip resistor in 1206 (3216 Metric) package rated for 0.25W (1/4W) power dissipation. This component is manufactured by YAGEO and features anti-sulfur coating, automotive AEC-Q200 qualification, and moisture resistance. The part is currently in active production status with 1035 pieces available in stock. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained within the specified parameter tolerances for automotive and industrial applications.

Substiute Parts

AT1206DRD07590RL

YAGEOIn Stock: 1093AT1206DRD07590RL Datasheet

Current PartRFQ

ERA-8AEB5900V

Panasonic Electronic ComponentsIn Stock: 9434ERA-8AEB5900V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AT1206DRD07590RL is determined by the following critical parameters:

• Resistance value: 590 Ohms (exact match required)
• Package type: 1206 (3216 Metric) form factor
• Power rating: 0.25W minimum
• Composition: Thin film construction
• Temperature coefficient: ±25ppm/°C
• Operating temperature range: -55°C to 155°C minimum
• Automotive qualification: AEC-Q200 compliance
• RoHS compliance: ROHS3 Compliant

The ERA-8AEB5900V qualifies as a direct substitute because it maintains all critical electrical parameters, identical package dimensions, equivalent power rating, and matching automotive certifications. The tolerance specification (±0.1% vs ±0.5%) represents an improvement in accuracy and does not restrict substitution.

Parameter Comparison

Engineering Selection Recommendations

Both the AT1206DRD07590RL and ERA-8AEB5900V are active production components with full AEC-Q200 automotive qualification and ROHS3 compliance. Selection between these parts should be based on:

• Availability and lead time requirements
• Tolerance specification needs (±0.1% provides tighter accuracy than ±0.5%)
• Supplier inventory and pricing
• Established supply chain relationships

Both components satisfy identical electrical and mechanical requirements for 1206 package thin film resistor applications in automotive and industrial environments.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB5900V replace AT1206DRD07590RL in existing designs?

A: Yes. Both parts share identical resistance values, power ratings, package dimensions, temperature coefficients, and operating temperature ranges. Both maintain AEC-Q200 automotive qualification and ROHS3 compliance.

Q: What is the difference in tolerance between these parts?

A: The AT1206DRD07590RL specifies ±0.5% tolerance, while the ERA-8AEB5900V specifies ±0.1% tolerance. The tighter tolerance of the Panasonic part does not restrict substitution and may provide improved accuracy in precision applications.

Q: Are the physical dimensions identical?

A: Both parts use the 1206 (3216 Metric) package. The AT1206DRD07590RL measures 3.10mm L × 1.60mm W with 0.65mm maximum seated height. The ERA-8AEB5900V measures 3.20mm L × 1.60mm W with 0.70mm maximum seated height. These minor dimensional variations remain within standard 1206 package tolerances and do not affect PCB layout compatibility.

Q: Do both parts meet automotive standards?

A: Yes. Both the AT1206DRD07590RL and ERA-8AEB5900V carry AEC-Q200 qualification for automotive applications and comply with ROHS3 regulations.

Q: What is the moisture sensitivity rating for these components?

A: Both parts are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.