AT1206DRD07232RL Equivalent & Substitute Parts

Part Overview

The AT1206DRD07232RL is a 232 Ohm ±0.5% thin film chip resistor in 1206 package format, rated for 0.25W (1/4W) power dissipation. This component is manufactured by YAGEO under the AT series and is designed for automotive applications with AEC-Q200 certification, anti-sulfur coating, and moisture resistance. The part is currently in active production status with 837 units in stock.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained across the same resistance value, power rating, package format, and automotive qualification standards.

Substiute Parts

AT1206DRD07232RL

YAGEOIn Stock: 915AT1206DRD07232RL Datasheet

Current PartRFQ

ERA-8AEB2320V

Panasonic Electronic ComponentsIn Stock: 4700ERA-8AEB2320V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AT1206DRD07232RL is determined by the following critical parameters:

• Resistance value: 232 Ohms (exact match required)
• Power rating: 0.25W minimum
• Package format: 1206 (3216 Metric) with compatible footprint dimensions
• Composition: Thin film construction
• Temperature coefficient: ±25ppm/°C or better
• Operating temperature range: -55°C to 155°C minimum
• Automotive qualification: AEC-Q200 certification required
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1 or better

The ERA-8AEB2320V qualifies as a direct substitute based on matching all critical parameters while offering improved tolerance specification (±0.1% versus ±0.5%).

Parameter Comparison

Engineering Selection Recommendations

Both the AT1206DRD07232RL and ERA-8AEB2320V are active production components with full AEC-Q200 automotive qualification and ROHS3 compliance. The ERA-8AEB2320V offers superior tolerance specification at ±0.1% compared to the AT1206DRD07232RL at ±0.5%, making it suitable for applications requiring tighter resistance accuracy. Both components maintain identical temperature coefficient, operating temperature range, and power dissipation characteristics. Selection between these parts should be based on tolerance requirements and component availability.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB2320V replace AT1206DRD07232RL in automotive applications?

A: Yes. Both components carry AEC-Q200 certification, operate across the same temperature range (-55°C to 155°C), and are rated for 0.25W power dissipation in 1206 package format. The ERA-8AEB2320V provides improved tolerance specification.

Q: Are there dimensional compatibility concerns between these parts?

A: Both components use the 1206 (3216 Metric) package format with compatible PCB footprints. The AT1206DRD07232RL measures 3.10mm × 1.60mm with 0.65mm maximum seated height, while the ERA-8AEB2320V measures 3.20mm × 1.60mm with 0.70mm maximum seated height. These minor dimensional variations remain within standard 1206 package tolerances and do not affect PCB layout compatibility.

Q: What is the significance of the ±0.1% tolerance improvement in the ERA-8AEB2320V?

A: The ERA-8AEB2320V tolerance of ±0.1% provides tighter resistance accuracy compared to the AT1206DRD07232RL at ±0.5%. This is relevant for precision analog circuits, measurement applications, or designs with strict tolerance stack-up requirements. For general-purpose applications, both tolerance levels are functionally equivalent.

Q: Are both parts compliant with current environmental regulations?

A: Yes. Both the AT1206DRD07232RL and ERA-8AEB2320V are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for automotive and industrial applications.

Q: What is the moisture sensitivity level for these components?

A: Both components are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. These parts can be stored and handled without special moisture control measures.