Equivalent & Substitute Parts for AT0805DRD07232RL

Part Overview

The AT0805DRD07232RL is a 232 Ohm thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This component is specified with ±0.5% tolerance, 0.125W power rating, and includes automotive AEC-Q200 qualification with anti-sulfur and moisture-resistant properties. The part is currently active in production with 1101 pieces in stock. Equivalent and substitute parts are identified when they maintain the same resistance value, package form factor, and core electrical characteristics while potentially offering different tolerance grades, power ratings, or manufacturer certifications.

Substiute Parts

AT0805DRD07232RL

YAGEOIn Stock: 1163AT0805DRD07232RL Datasheet

Current PartRFQ

RT0805BRD07232RL

YAGEOIn Stock: 2775RT0805BRD07232RL Datasheet

MFR RecommendedRFQ

5-2176091-8

TE Connectivity Passive ProductIn Stock: 38995-2176091-8 Datasheet

MFR RecommendedRFQ

ERA-6AEB2320V

Panasonic Electronic ComponentsIn Stock: 9450ERA-6AEB2320V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AT0805DRD07232RL is determined by the following criteria:

Primary Matching Parameters:

• Resistance value: 232 Ohms (exact match required)
• Package form factor: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Temperature coefficient: ±25ppm/°C (exact match required)
• Operating temperature range: -55°C to 155°C (exact match required)

Allowable Variations:

• Tolerance: May be equal to or tighter than ±0.5%
• Power rating: May be equal to or greater than 0.125W
• Manufacturer: Different manufacturers permitted if all primary parameters match
• Certifications: AEC-Q200 automotive qualification is optional for substitution but preferred for automotive applications

The three substitute parts listed below meet all primary matching parameters and are therefore electrically and mechanically compatible with the AT0805DRD07232RL.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are ROHS3 compliant and maintain MSL 1 moisture sensitivity rating, ensuring compatibility with standard PCB assembly and storage conditions.

RT0805BRD07232RL (YAGEO): This substitute offers tighter tolerance (±0.1% versus ±0.5%) while maintaining identical power rating, package dimensions, and temperature characteristics. It is suitable for applications requiring improved tolerance performance. This part does not carry AEC-Q200 certification.

5-2176091-8 (TE Connectivity): This substitute provides increased power dissipation capability (0.25W versus 0.125W) in the same 0805 package footprint. The seated height is 0.026" (0.65mm) compared to 0.024" (0.60mm) for the main part. This part does not carry AEC-Q200 certification and is suitable for applications with higher thermal margin requirements.

ERA-6AEB2320V (Panasonic): This substitute matches the main part in tolerance (±0.1%), power rating (0.125W), and package dimensions. It carries AEC-Q200 automotive qualification identical to the main part, making it the preferred direct substitute for automotive applications requiring equivalent certifications.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07232RL be used as a direct replacement for AT0805DRD07232RL?

A: Yes. Both parts share identical resistance, package, power rating, and temperature characteristics. The RT0805BRD07232RL offers tighter tolerance (±0.1% versus ±0.5%), which is an improvement. However, the RT0805BRD07232RL does not carry AEC-Q200 certification, so it is not suitable for automotive applications requiring this qualification.

Q: What is the difference between the 0.125W and 0.25W power ratings?

A: The 5-2176091-8 substitute is rated for 0.25W continuous power dissipation, compared to 0.125W for the main part. This provides additional thermal margin in high-power applications. The 0.25W part has a slightly greater seated height (0.026" versus 0.024"), which must be verified against PCB clearance requirements.

Q: Is ERA-6AEB2320V suitable for automotive applications?

A: Yes. The ERA-6AEB2320V carries AEC-Q200 automotive qualification identical to the main part AT0805DRD07232RL, making it fully compatible for automotive circuit designs.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All substitute parts listed are supplied in Tape & Reel (TR) packaging, matching the main part packaging format.

Q: What is the significance of MSL 1 rating?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life without moisture baking requirements. All parts in this comparison carry MSL 1 rating, ensuring no special storage or handling procedures are necessary.

Q: Can these parts be used interchangeably on the same PCB?

A: Yes, provided the application does not require specific certifications. For automotive designs, ERA-6AEB2320V is the recommended substitute due to AEC-Q200 qualification. For general applications, all three substitutes are mechanically and electrically compatible with the AT0805DRD07232RL footprint.