AT0805DRD07124RL Equivalent & Substitute Parts

Part Overview

The AT0805DRD07124RL is a 124 Ohm ±0.5% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This component is rated for 0.125W (1/8W) power dissipation with anti-sulfur and automotive AEC-Q200 qualification. The part is actively produced and available in high volume inventory. Substitute parts are identified to address application requirements for improved tolerance specifications, enhanced power ratings, or alternative qualified manufacturers while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	124 Ohms
Tolerance	±0.5%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thin Film
Temperature Coefficient	±25ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Features	Anti-Sulfur, Automotive AEC-Q200, Moisture Resistant
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Mandatory Compatibility Parameters:

Resistance value: 124 Ohms (exact match required)
Package / Case: 0805 (2012 Metric) (exact match required)
Composition: Thin Film (exact match required)
Temperature Coefficient: ±25ppm/°C (exact match required)
Operating Temperature Range: minimum -55°C ~ 155°C (equal or extended range acceptable)
RoHS Status: ROHS3 Compliant (required)
Moisture Sensitivity Level: 1 (Unlimited) (required)

Allowable Variation Parameters:

Tolerance: ±0.5% or tighter (±0.1% acceptable as upgrade)
Power Rating: 0.125W or higher (0.26W or 0.25W acceptable as upgrade)
Features: Anti-Sulfur and AEC-Q200 features may vary by manufacturer

All identified substitute parts meet these mandatory compatibility requirements and are qualified for direct substitution in the AT0805DRD07124RL application.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (Watts)	Temperature Coefficient	Operating Temperature	Package	AEC-Q200	RoHS Status
AT0805DRD07124RL	YAGEO	124 Ohms	±0.5%	0.125W	±25ppm/°C	-55°C ~ 155°C	0805	Yes	ROHS3
RT0805BRD07124RL	YAGEO	124 Ohms	±0.1%	0.125W	±25ppm/°C	-55°C ~ 155°C	0805	No	ROHS3
TNPW0805124RBEEA	Vishay Dale	124 Ohms	±0.1%	0.26W	±25ppm/°C	-55°C ~ 175°C	0805	Yes	ROHS3
3-2176091-3	TE Connectivity Passive Product	124 Ohms	±0.1%	0.25W	±25ppm/°C	-55°C ~ 155°C	0805	No	ROHS3
ERA-6AEB1240V	Panasonic Electronic Components	124 Ohms	±0.1%	0.125W	±25ppm/°C	-55°C ~ 155°C	0805	Yes	ROHS3
RG2012P-1240-B-T5	Susumu	124 Ohms	±0.1%	0.125W	±25ppm/°C	-55°C ~ 155°C	0805	Yes	ROHS3

Engineering Selection Recommendations

Direct Substitutes (Equivalent Performance): ERA-6AEB1240V (Panasonic) and RG2012P-1240-B-T5 (Susumu) provide direct substitution with improved tolerance (±0.1%) while maintaining identical power rating and operating temperature range. Both parts carry AEC-Q200 automotive qualification matching the original specification.

Upgraded Substitutes (Enhanced Performance): TNPW0805124RBEEA (Vishay Dale) offers increased power rating (0.26W) and extended operating temperature range (-55°C ~ 175°C) with ±0.1% tolerance and AEC-Q200 qualification. This part is suitable for applications requiring higher thermal margin or extended temperature operation.

Alternative Substitutes (Tolerance Upgrade): RT0805BRD07124RL (YAGEO) provides ±0.1% tolerance improvement from the same manufacturer. 3-2176091-3 (TE Connectivity) offers ±0.1% tolerance with increased power rating (0.25W) but lacks AEC-Q200 designation.

All substitute parts maintain ROHS3 compliance, MSL Level 1 rating, and 0805 package compatibility required for PCB assembly without modification.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with ±0.1% tolerance in place of the ±0.5% original? A: Yes. Tighter tolerance specifications are compatible and represent an upgrade in precision. The circuit design margin accommodates the original ±0.5% specification, so ±0.1% tolerance parts will function identically or with improved accuracy.

Q: Are higher power-rated substitutes (0.26W or 0.25W) safe to use in a 0.125W application? A: Yes. Higher power ratings indicate greater thermal capacity and do not affect electrical performance in lower-power applications. The component will operate at lower stress levels, potentially improving reliability.

Q: Does the extended temperature range (-55°C ~ 175°C) of TNPW0805124RBEEA affect compatibility? A: No. Extended operating temperature range is a superset of the original -55°C ~ 155°C specification. The part is fully compatible for all applications within the original temperature range and provides additional capability for higher-temperature environments.

Q: What is the significance of AEC-Q200 qualification? A: AEC-Q200 certification indicates automotive-grade reliability testing and qualification. Parts with this rating meet stringent automotive industry standards. Substitutes with AEC-Q200 (ERA-6AEB1240V, RG2012P-1240-B-T5, TNPW0805124RBEEA) maintain automotive-grade qualification. Parts without this designation (RT0805BRD07124RL, 3-2176091-3) are suitable for non-automotive applications or where automotive qualification is not required.

Q: Are all substitute parts available in the same packaging format? A: Yes. All substitute parts are supplied in Tape & Reel (TR) packaging in 0805 (2012 Metric) case format, compatible with standard SMD assembly equipment and processes.

Q: Can I mix different substitute part numbers in the same production run? A: Yes. All substitute parts meet the same electrical and mechanical specifications for the 124 Ohm 0805 thin film resistor application. Mixed sourcing is permissible provided assembly and testing procedures remain consistent.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message