AT06-6S-MM01 Equivalent & Substitute Parts

Part Overview

The AT06-6S-MM01 is a 6-position rectangular connector plug housing manufactured by Amphenol Sine Systems Corp. This connector belongs to the AT Series™ product line and is classified as an active product. The housing features a gray thermoplastic construction with crimp contact termination and latch lock fastening. This part is designed for free-hanging, in-line applications requiring sealed connections with integrated cap coverage.

Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design requirements permit the use of equivalent connector housings that maintain functional compatibility across critical electrical and mechanical parameters.

Substiute Parts

AT06-6S-MM01

Amphenol Sine Systems CorpIn Stock: 1098AT06-6S-MM01 Datasheet

Current PartRFQ

DT06-6S-CE01

TE Connectivity Deutsch ConnectorsIn Stock: 1472DT06-6S-CE01 Datasheet

DirectRFQ

DT06-6S-CE05

TE Connectivity Deutsch ConnectorsIn Stock: 9986DT06-6S-CE05 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the AT06-6S-MM01 are qualified based on the following critical parameters that determine functional and mechanical compatibility:

Core Compatibility Criteria:

• Connector Type: Plug housing configuration
• Contact Type: Female Socket contacts
• Number of Positions: 6-position configuration
• Number of Rows: 3-row arrangement
• Mounting Type: Free Hanging (In-Line) orientation
• Contact Termination: Crimp termination method
• Fastening Type: Latch Lock mechanism
• Color: Gray housing
• Operating Temperature Range: -55°C ~ 125°C
• Regulatory Compliance: ROHS3 Compliant and REACH Unaffected status

The substitute parts DT06-6S-CE01 and DT06-6S-CE05, manufactured by TE Connectivity Deutsch Connectors, satisfy all core compatibility criteria. Both parts maintain identical connector type, contact configuration, position count, row arrangement, mounting method, termination type, fastening mechanism, color, and operating temperature specifications. Both substitute parts retain ROHS3 compliance and REACH Unaffected status, ensuring regulatory alignment with the primary part.

Parameter Comparison

Engineering Selection Recommendations

All three parts—AT06-6S-MM01, DT06-6S-CE01, and DT06-6S-CE05—maintain active product status and full regulatory compliance under ROHS3 and REACH standards. Selection between these parts is determined by application-specific requirements and feature availability.

AT06-6S-MM01 serves as the primary specification when Amphenol Sine Systems Corp sourcing is required or when the sealed cap feature without enhanced IP ratings is sufficient for the application.

DT06-6S-CE01 provides an equivalent substitute with enhanced environmental protection through IP68 and IP6K9K ratings, along with reduced wire seals. This part is suitable for applications requiring higher ingress protection while maintaining the same core connector architecture.

DT06-6S-CE05 extends the feature set further with the addition of a blocked gasket in combination with IP68 and IP6K9K ratings. This configuration is appropriate for applications demanding maximum environmental sealing and gasket-based contact protection.

All three parts support the same operating temperature range (-55°C ~ 125°C), crimp termination methodology, and latch lock fastening. Inventory availability and lead time considerations may influence part selection, with DT06-6S-CE05 currently showing the highest stock level at 9946 pieces.

Frequently Asked Questions (FAQ)

Q: Can DT06-6S-CE01 and DT06-6S-CE05 be used interchangeably with AT06-6S-MM01?

A: Yes, both DT series parts are direct substitutes for the AT06-6S-MM01 across all core connector parameters: 6-position plug housing, female socket contacts, 3-row configuration, crimp termination, latch lock fastening, and identical operating temperature range. All three parts are ROHS3 compliant and REACH unaffected.

Q: What is the difference between DT06-6S-CE01 and DT06-6S-CE05?

A: Both parts share identical core connector specifications. DT06-6S-CE05 includes an additional blocked gasket feature in addition to the IP68 and IP6K9K environmental protection ratings present in both parts. The blocked gasket provides enhanced contact sealing for applications requiring maximum environmental isolation.

Q: Are the insulation materials interchangeable between these parts?

A: The insulation materials differ across the three parts: AT06-6S-MM01 uses thermoplastic, DT06-6S-CE01 uses polyamide (PA66) nylon 6/6 glass-filled material, and DT06-6S-CE05 uses plastic. Despite material differences, all three parts maintain the same operating temperature range and regulatory compliance status. Material selection should be verified against specific application environmental and chemical exposure requirements.

Q: Do these connector housings include contacts?

A: No. All three parts—AT06-6S-MM01, DT06-6S-CE01, and DT06-6S-CE05—are connector housings only. Contacts are not included and must be sourced separately. Crimp contacts compatible with 6-position, 3-row configurations must be specified and procured independently.

Q: What is the significance of IP68 and IP6K9K ratings on the DT series parts?

A: IP68 rating indicates complete dust protection and water immersion capability up to specified depths. IP6K9K rating indicates protection against high-pressure water jets. These ratings provide enhanced environmental sealing compared to the sealed cap feature of the AT06-6S-MM01, making DT series parts suitable for harsh outdoor or high-moisture applications.

Q: Are all three parts suitable for the same temperature range applications?

A: Yes. All three parts—AT06-6S-MM01, DT06-6S-CE01, and DT06-6S-CE05—support the identical operating temperature range of -55°C to 125°C. Temperature performance is not a differentiating factor in part selection.

Q: What packaging format is used for these connector housings?

A: All three parts are supplied in bulk packaging. Specific quantity per package and reel configurations should be confirmed with the supplier based on current inventory and ordering requirements.