AT06-12SC-SS01 Equivalent & Substitute Parts Reference

Part Overview

The AT06-12SC-SS01 is a 12-position rectangular connector plug housing manufactured by Amphenol Sine Systems Corp, part of the AT Series™ product line. This connector features female socket contacts with crimp termination and latch lock fastening, designed for free-hanging in-line applications. The housing is green-colored with sealed design and cap cover features. The part is currently Active in product status with 954 pieces in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required for applications where the original part is unavailable or when design flexibility permits alternative qualified sources.

Substiute Parts

AT06-12SC-SS01

Amphenol Sine Systems CorpIn Stock: 1030AT06-12SC-SS01 Datasheet

Current PartRFQ

DT06-12SC-C017

TE Connectivity Deutsch ConnectorsIn Stock: 1413DT06-12SC-C017 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the AT06-12SC-SS01 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Plug
• Contact Type: Female Socket
• Number of Positions: 12
• Number of Rows: 2
• Mounting Type: Free Hanging (In-Line)
• Contact Termination: Crimp
• Fastening Type: Latch Lock
• Color: Green
• Operating Temperature Range: -55°C ~ 125°C
• RoHS Compliance: ROHS3 Compliant
• REACH Status: REACH Unaffected

The substitute part DT06-12SC-C017 from TE Connectivity Deutsch Connectors meets all mandatory matching parameters. Both parts are rectangular connector plug housings with identical electrical and mechanical interface specifications, enabling direct substitution in applications requiring 12-position female socket crimp-terminated connectors with latch lock fastening.

Parameter Comparison

Engineering Selection Recommendations

Both the AT06-12SC-SS01 and DT06-12SC-C017 are Active product status connectors with full ROHS3 compliance and REACH Unaffected status, qualifying them for use in regulated applications. The DT06-12SC-C017 provides additional environmental protection specifications (IP68, IP6K9K ratings) and higher inventory availability (1349 pieces versus 954 pieces). Selection between these parts should be based on application-specific requirements for environmental sealing performance and supply chain considerations. Both parts operate across the identical temperature range (-55°C ~ 125°C) and utilize equivalent crimp termination and latch lock fastening mechanisms.

Frequently Asked Questions (FAQ)

Q: Can DT06-12SC-C017 directly replace AT06-12SC-SS01 in existing designs?

A: Yes. Both connectors share identical specifications for connector type (plug), contact type (female socket), position count (12), row configuration (2 rows), mounting method (free hanging in-line), termination type (crimp), fastening mechanism (latch lock), color (green), and operating temperature range (-55°C ~ 125°C). Direct substitution is supported for applications where these parameters define the interface requirement.

Q: What are the differences between these two parts?

A: The primary differences are manufacturer source (Amphenol versus TE Connectivity), insulation material composition (thermoplastic versus polyamide glass-filled nylon), and environmental protection features. The DT06-12SC-C017 specifies IP68 and IP6K9K ratings, while the AT06-12SC-SS01 specifies sealed design with cap cover. The DT06-12SC-C017 also provides explicit pitch (0.359") and row spacing (0.175") specifications.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both AT06-12SC-SS01 and DT06-12SC-C017 are ROHS3 Compliant and REACH Unaffected, meeting regulatory requirements for restricted substance use and chemical safety.

Q: What is the contact wire gauge compatibility?

A: The AT06-12SC-SS01 is specified for 14-20 AWG wire. Contact specifications for the DT06-12SC-C017 are not provided in the available data. Verify contact compatibility with the specific crimp contacts selected for each housing.

Q: Do these connectors include contacts?

A: The AT06-12SC-SS01 is specified as "Contacts Not Included." Contact inclusion status for the DT06-12SC-C017 is not specified in the available data. Contacts must be sourced separately and verified for compatibility with the selected housing.

Q: Which part should be selected for new designs?

A: Selection should be based on application requirements for environmental protection (IP ratings versus sealed design), material performance needs (thermoplastic versus glass-filled polyamide), and supply chain availability. Both parts meet identical electrical and mechanical interface specifications.