AT06-12SC-MM01 Equivalent & Substitute Parts

Part Overview

The AT06-12SC-MM01 is a 12-position rectangular connector plug housing manufactured by Amphenol Sine Systems Corp. This connector is part of the AT Series™ product line and is designed for applications requiring free-hanging, in-line plug configurations with crimp termination and latch lock fastening. The part is actively produced and maintained in inventory.

Substitute parts are identified when equivalent electrical and mechanical parameters are met, allowing for component interchangeability in applications where the original part may be unavailable or where design requirements permit alternative manufacturers' offerings.

Substiute Parts

AT06-12SC-MM01

Amphenol Sine Systems CorpIn Stock: 1488AT06-12SC-MM01 Datasheet

Current PartRFQ

DT06-12SC-CE01

TE Connectivity Deutsch ConnectorsIn Stock: 1490DT06-12SC-CE01 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The DT06-12SC-CE01 manufactured by TE Connectivity Deutsch Connectors is identified as a substitute for the AT06-12SC-MM01 based on the following matching parameters:

Electrical and Mechanical Compatibility Criteria:

• Connector Type: Plug
• Contact Type: Female Socket
• Number of Positions: 12
• Number of Rows: 2
• Mounting Type: Free Hanging (In-Line)
• Contact Termination: Crimp
• Fastening Type: Latch Lock
• Operating Temperature Range: -55°C ~ 125°C

Both parts meet identical specifications for these core parameters, establishing functional equivalence. The substitute part maintains the same electrical interface and mechanical mounting characteristics required for direct substitution in applications utilizing the AT06-12SC-MM01.

Parameter Comparison

Engineering Selection Recommendations

Both the AT06-12SC-MM01 and DT06-12SC-CE01 are active products with current manufacturing status and full ROHS3 compliance. Selection between these parts is based on application-specific requirements:

AT06-12SC-MM01 Selection Criteria:

• Applications requiring thermoplastic insulation material
• Green connector housing color specification
• Standard sealed connector configuration
• MSL 1 (Unlimited) moisture sensitivity rating

DT06-12SC-CE01 Selection Criteria:

• Applications requiring enhanced environmental sealing (IP68, IP6K9K ratings)
• Polyamide (PA66) glass-filled insulation material requirement
• Gray connector housing color specification
• Applications with reduced wire seal requirements

Both parts satisfy identical electrical and mechanical interface requirements. The choice between manufacturers depends on material composition, environmental protection rating, and color specification needs for the specific application.

Frequently Asked Questions (FAQ)

Q: Can the DT06-12SC-CE01 directly replace the AT06-12SC-MM01 in existing assemblies?

A: Direct replacement is possible when the application does not have specific requirements for connector color, insulation material type, or environmental sealing ratings. Both parts share identical electrical and mechanical interface parameters including 12-position configuration, crimp termination, latch lock fastening, and operating temperature range.

Q: What are the differences in environmental protection between these two connectors?

A: The AT06-12SC-MM01 provides standard sealed configuration. The DT06-12SC-CE01 provides enhanced environmental protection with IP68 and IP6K9K ratings, along with reduced wire seals. Applications requiring higher environmental protection should specify the DT06-12SC-CE01.

Q: Are there material compatibility considerations when substituting these parts?

A: The AT06-12SC-MM01 uses thermoplastic insulation material, while the DT06-12SC-CE01 uses polyamide (PA66) glass-filled nylon 6/6. Both materials are suitable for the specified operating temperature range of -55°C to 125°C. Material selection should align with application chemical exposure and mechanical stress requirements.

Q: Do both parts require the same contact specifications?

A: Both the AT06-12SC-MM01 and DT06-12SC-CE01 are plug housings with female socket contacts and require separate crimp contacts. The note "Contacts Not Included" applies to both parts. Contact compatibility must be verified with the respective manufacturer specifications for each housing.

Q: What is the significance of the color difference between these connectors?

A: The AT06-12SC-MM01 is green and the DT06-12SC-CE01 is gray. Color coding is typically used for visual identification and circuit organization in complex assemblies. Substitution is acceptable when color coding is not a functional requirement of the application.

Q: Are both parts compliant with current regulatory standards?

A: Both parts are ROHS3 compliant. The AT06-12SC-MM01 has MSL 1 (Unlimited) rating. The DT06-12SC-CE01 has MSL Not Applicable. Both parts carry ECCN EAR99 classification. Regulatory compliance verification should be performed for specific end-use applications.