Request Quote
(Ships tomorrow)
AT04-6P-WHT Equivalent & Substitute Parts
Part Overview
The AT04-6P-WHT is a 6-position rectangular connector receptacle housing manufactured by Amphenol Sine Systems Corp in the AT Series™. This component is a sealed, thermoplastic receptacle designed for free-hanging in-line mounting with crimp contact termination and latch holder fastening. The part is classified as Active product status with full RoHS3 compliance and REACH unaffected designation. Substitute parts are identified when equivalent electrical and mechanical specifications are required but alternative color options are necessary for circuit identification, wiring harness organization, or system design requirements.
Substiute Parts
Key Parameters
| Parameter | Specification |
|---|---|
| Manufacturer Part Number | AT04-6P-WHT |
| Manufacturer | Amphenol Sine Systems Corp |
| Series | AT Series™ |
| Category | Rectangular Connectors |
| Connector Type | Receptacle |
| Contact Type | Male Pin |
| Number of Positions | 6 |
| Number of Rows | 2 |
| Mounting Type | Free Hanging (In-Line) |
| Contact Termination | Crimp |
| Fastening Type | Latch Holder |
| Features | Sealed |
| Insulation Material | Thermoplastic |
| Operating Temperature Range | -55°C ~ 125°C |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| REACH Status | REACH Unaffected |
| Product Status | Active |
Substitute Part Grouping Explanation
Substitute parts for the AT04-6P-WHT are determined by equivalence across all electrical and mechanical parameters while varying only in color designation. The substitution logic is based on the following criteria:
Substitution-Determining Parameters:
- Connector Type: Receptacle
- Contact Type: Male Pin
- Number of Positions: 6
- Number of Rows: 2
- Mounting Type: Free Hanging (In-Line)
- Contact Termination: Crimp
- Fastening Type: Latch Holder
- Features: Sealed
- Insulation Material: Thermoplastic
- Operating Temperature Range: -55°C ~ 125°C
- Series: AT Series™
- RoHS Status: ROHS3 Compliant
- Moisture Sensitivity Level: 1 (Unlimited)
- REACH Status: REACH Unaffected
Variable Parameter:
- Color: White (main part); Blue, Brown, Green, Orange, Red, Yellow (substitute parts)
All substitute parts share the base product number AT04-6P and maintain identical functional and environmental specifications. Color variation serves identification and organizational purposes in connector systems without affecting electrical or mechanical performance.
Parameter Comparison
| Parameter | AT04-6P-WHT | AT04-6P-BLU | AT04-6P-BRN | AT04-6P-GRN | AT04-6P-ORG | AT04-6P-RED | AT04-6P-YEL |
|---|---|---|---|---|---|---|---|
| Manufacturer | Amphenol Sine Systems Corp | Amphenol Sine Systems Corp | Amphenol Sine Systems Corp | Amphenol Sine Systems Corp | Amphenol Sine Systems Corp | Amphenol Sine Systems Corp | Amphenol Sine Systems Corp |
| Series | AT Series™ | AT Series™ | AT Series™ | AT Series™ | AT Series™ | AT Series™ | AT Series™ |
| Connector Type | Receptacle | Receptacle | Receptacle | Receptacle | Receptacle | Receptacle | Receptacle |
| Contact Type | Male Pin | Male Pin | Male Pin | Male Pin | Male Pin | Male Pin | Male Pin |
| Number of Positions | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
| Number of Rows | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Mounting Type | Free Hanging (In-Line) | Free Hanging (In-Line) | Free Hanging (In-Line) | Free Hanging (In-Line) | Free Hanging (In-Line) | Free Hanging (In-Line) | Free Hanging (In-Line) |
| Contact Termination | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp | Crimp |
| Fastening Type | Latch Holder | Latch Holder | Latch Holder | Latch Holder | Latch Holder | Latch Holder | Latch Holder |
| Features | Sealed | Sealed | Sealed | Sealed | Sealed | Sealed | Sealed |
| Insulation Material | Thermoplastic | Thermoplastic | Thermoplastic | Thermoplastic | Thermoplastic | Thermoplastic | Thermoplastic |
| Operating Temperature Range | -55°C ~ 125°C | -55°C ~ 125°C | -55°C ~ 125°C | -55°C ~ 125°C | -55°C ~ 125°C | -55°C ~ 125°C | -55°C ~ 125°C |
| RoHS Status | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) |
| REACH Status | REACH Unaffected | REACH Unaffected | REACH Unaffected | REACH Unaffected | REACH Unaffected | REACH Unaffected | REACH Unaffected |
| Product Status | Active | Active | Active | Active | Active | Active | Active |
| Color | White | Blue | Brown | Green | Orange | Red | Yellow |
Engineering Selection Recommendations
All substitute parts listed for the AT04-6P-WHT maintain Active product status with identical compliance certifications. Each part carries ROHS3 compliance and REACH unaffected designation, ensuring regulatory equivalence across all color variants. The selection of a substitute part should be based on system design requirements for connector identification and circuit organization rather than functional or environmental performance differences.
The AT04-6P series rectangular connectors are suitable for applications requiring sealed, thermoplastic receptacle housings with crimp termination across the full operating temperature range of -55°C to 125°C. All variants support free-hanging in-line mounting with latch holder fastening and maintain unlimited moisture sensitivity classification.
Frequently Asked Questions (FAQ)
Q: Are all AT04-6P color variants electrically identical?
A: Yes. All AT04-6P variants share identical electrical specifications, contact configuration, termination method, and operating parameters. Color differentiation serves identification purposes only.
Q: Can AT04-6P-WHT be directly replaced with AT04-6P-BLU in an existing assembly?
A: Yes. The AT04-6P-BLU maintains all electrical and mechanical specifications of the AT04-6P-WHT. Direct substitution is supported for applications where color coding is not a functional requirement.
Q: What is the operating temperature range for all AT04-6P variants?
A: All AT04-6P color variants operate across the range of -55°C to 125°C with identical thermal performance.
Q: Are contacts included with AT04-6P-WHT and substitute parts?
A: No. All AT04-6P variants are supplied as housings only. Contacts must be sourced separately and installed through crimp termination.
Q: Do all AT04-6P variants meet the same compliance standards?
A: Yes. All variants are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity classification.
Q: What is the difference between AT04-6P-WHT and AT04-6P-GRN?
A: The only difference is the housing color: white versus green. All other specifications including connector type, position count, mounting method, fastening type, and operating parameters are identical.
Q: Can AT04-6P variants be mixed in a single connector system?
A: Yes. All variants are mechanically and electrically compatible. Mixed color usage is supported for circuit identification and harness organization purposes.
Q: What packaging format is used for AT04-6P variants?
A: All AT04-6P variants are supplied in box packaging.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts